[prev in list] [next in list] [prev in thread] [next in thread] 

List:       sylpheed
Subject:    [sylpheed:15676] Re: Fw: Re:  Getting GPGME to be recognized in 0.8.0 during ./configure --enable-gp
From:       Francois Barriere <fbarriere () atmel ! fr>
Date:       2002-08-29 16:51:28
[Download RAW message or body]

On Thu, 29 Aug 2002 18:11:07 +0200
Melvin Hadasht <melvin.hadasht@free.fr> wrote:

> Sorry, I don't have any other idea a part from looking in config.log for the
> exact nature of the error.

  Is the ultimate solution... The configure reads the version from the
-config script, then compiles a small program that reads the version
from the shared library itself. In your case the second test fails.
It means the library used for the linking is the wrong one (could be
a due to a library installed in two different places, or to an updated
library without runing the ldconfig).

You can try to re-run ldconfig, remove the config.cache and start again,
but you can also try to locate the test in the configure script and after
the small program compilation insert a ldd <program> to print the list
of libraries used (here you should be able to trace the bad gpgme
library used).

Francois.

-- 
                           Francois BARRIERE
   Design Flow Group                          ATMEL
   Design Flow Engineer                       Zone Industrielle
   Tel: (33) 0 442 53 61 98                   13106 ROUSSET
   Fax: (33) 0 442 53 60 01                   FRANCE
E-Mail: fbarriere@atmel.fr                    T: (33) 0 442 53 60 00

[prev in list] [next in list] [prev in thread] [next in thread]