[prev in list] [next in list] [prev in thread] [next in thread]
List: suse-linux-e
Subject: Re: [SLE] Re: VariCAD, was [SLE] Epson Stylus Photo 2200
From: Mike McMullin <mwmcmlln () mnsi ! net>
Date: 2004-04-26 20:55:49
Message-ID: 1083012949.3982.3.camel () p-733-Win ! mwmcmlln
[Download RAW message or body]
On Mon, 2004-04-26 at 08:44, Tony Alfrey wrote:
> On Monday 26 April 2004 03:28 am, Mike McMullin wrote:
> > On Sun, 2004-04-25 at 23:36, Tony Alfrey wrote:
> <snip>
> > > VariCAD is
> > > a) about 400 bucks US
> > > b) a true solid modeler, sorta like Autodesk Inventor
> > > c) will generate dxf 2-D files, and 3-D iges and dwg files that are
> > > readable by autocad but not "importable" into autocad. So autocad
> > > cannot edit the files.
> <snip>
> >
> > Is the .IGES translator good enough for the like of WorkNC
> > *horribly fussy)?
> >
> > Mike
>
> Ummm, I don't know what you mean. I usually provide the 2-D dxf file
> and the solid iges file to my machine shop. Then, if I forget a
> dimension on the dxf, they pull up the iges solid to measure the part.
> The translator works 99% of the time and VariCAD is working on a new
> kernel that is supposed to fix a variety of small annoyances..
We use WorkNC at work, and it's not the greatest in terms of importing
IGES files put out by Unigraphics. We get a lot of mangled surfaces,
and holes where there shold be any. Needless to say, holes make for
damaged cutters. :(
Mike
--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic