[prev in list] [next in list] [prev in thread] [next in thread]
List: suse-linux-e
Subject: [SLE] adsl
From: "Peter Bradley" <apvx95 () dsl ! pipex ! com>
Date: 2003-08-31 19:12:21
[Download RAW message or body]
My previous post was a mess, so this is a cleaned up version (and an
apology):
Finally managed to install the drivers following the instructions above, but
I now get the following message when I try start-adsl:
I'm sorry, I didn't find your ADSL modem!
Tips: check that you are running this program as root and your device is
seen by your OS
Linux users : check /proc/bus/usb/devices
BSD users : check your ugen and usb entries in /dev
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
SIOCADDRT: No such device
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>]
LCP: timeout sending Config-Requests
Connection terminated.
Waiting for 1 child processes...
script /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1, pid 1942
Terminating on signal 15.
Waiting for 1 child processes...
script /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1, pid 1942
Child process /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1 (pid
1942)
terminated with signal 15
I checked /proc/bus/usb/devices, and it says:
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.20-4GB ehci-hcd
S: Product=PCI device 1039:7002 (Silicon Integrated Systems [SiS])
S: SerialNumber=00:03.3
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
Since this means nothing to me, I tried (on advice) lsusb and lsmod, which
give:
lsusb output
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
lsmod output
Module Size Used by Not tainted
snd-pcm-oss 45888 0 (autoclean)
snd-mixer-oss 13560 1 (autoclean) [snd-pcm-oss]
videodev 5600 0 (autoclean)
isa-pnp 29672 0 (unused)
usbserial 18460 0 (autoclean) (unused)
parport_pc 25800 1 (autoclean)
lp 6240 0 (autoclean)
parport 22440 1 (autoclean) [parport_pc lp]
ipv6 134388 -1 (autoclean)
snd-intel8x0 19204 1
snd-pcm 62912 0 [snd-pcm-oss snd-intel8x0]
snd-timer 11904 0 [snd-pcm]
snd-ac97-codec 31152 0 [snd-intel8x0]
snd-mpu401-uart 3360 0 [snd-intel8x0]
snd-rawmidi 13824 0 [snd-mpu401-uart]
snd-seq-device 4000 0 [snd-rawmidi]
snd 35940 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0
snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi
snd-seq-device]
soundcore 3396 0 [snd]
ipt_TOS 984 9 (autoclean)
ipt_LOG 3288 1 (autoclean)
ipt_state 568 10 (autoclean)
st 27956 0 (autoclean) (unused)
sr_mod 12600 0 (autoclean)
sg 25852 0 (autoclean)
mousedev 4148 0 (unused)
joydev 5632 0 (unused)
evdev 4032 0 (unused)
input 3104 0 [mousedev joydev evdev]
usb-ohci 18760 0 (unused)
ehci-hcd 16012 0 (unused)
usbcore 57836 1 [usbserial usb-ohci ehci-hcd]
raw1394 14516 0 (unused)
pppoatm 2408 0 (unused)
ppp_generic 16476 0 (autoclean) [pppoatm]
slhc 4624 0 (autoclean) [ppp_generic]
ohci1394 16180 0 (unused)
ieee1394 32880 0 [raw1394 ohci1394]
af_packet 12392 1 (autoclean)
sis900 12588 1
ipt_REJECT 2904 3 (autoclean)
iptable_mangle 2072 1 (autoclean)
iptable_filter 1644 1 (autoclean)
ip_nat_ftp 2736 0 (unused)
iptable_nat 15470 1 [ip_nat_ftp]
ip_conntrack_ftp 3664 1
ip_conntrack 16380 3 [ipt_state ip_nat_ftp iptable_nat
ip_conntrack_ftp]
ip_tables 11040 9 [ipt_TOS ipt_LOG ipt_state ipt_REJECT
iptable_mangle iptable_filter iptable_nat]
ide-scsi 9296 0
ide-cd 29404 0
cdrom 28192 0 [sr_mod ide-cd]
nls_iso8859-1 2812 1 (autoclean)
ntfs 75244 1 (autoclean)
reiserfs 200532 1
Anyone got any ideas what I might try next? Sorry to have to rely so
completely on you all, but I just have no idea about these things and SuSE
support say they can't help.
Apologies again.
Cheers
Peter
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic