From suse-linux  Tue Jan 08 14:55:47 2002
From: Stefan Fehlbier <rheinskater () gmx ! de>
Date: Tue, 08 Jan 2002 14:55:47 +0000
To: suse-linux
Subject: Koncd
X-MARC-Message: https://marc.info/?l=suse-linux&m=101798237076557

Hei

bin etwas weiter, aber nun folgnde Aussage von Koncd 1.0 rc2
Kann es sein das mein cdrecord 1.10 niht sauber arbeitet,
oder wie soll ich das verstehen ?
Wichtig: Ist eine Fehlermeldung aus dem Dummy Modues-> simuliert nur
Habe sonst keine Ahnung was es sonst sein soll

scsidev: '0,4,0'
scsibus: 0 target: 4 lun: 0

Linux sg driver version: 3.1.20

WRa Data 01 0A 00 00

Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J=F6rg Schillin=
g
TOC Type: 3 =3D CD-ROM XA mode 2
Using libscg version 'schily-0.5'
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : RELADR SYNC LINKED
Vendor_info    : 'TEAC    '
Identifikation : 'CD-R55S         '
Revision       : '1.0R'
Device seems to be: Teac CD-R50S.
Using driver for Teac CD-R50S, Teac CD-R55S, JVC XR-W2010, Pinnacle=20
RCD-5020 (teac_cdr50).
Driver flags   : SWABAUDIO
Buffer cap: 655360
Drive buf size : 655360 =3D 640 KB
FIFO size      : 12582912 =3D 12288 KB

Track 01: data  374 MB
Total size:     430 MB (42:39.60) =3D 191970 sectors
Lout start:     430 MB (42:41/45) =3D 191970 sectors
Current Secsize: 2048
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 167879
Starting to write CD/DVD at speed 4 in dummy mode for multi session.
Last chance to quit, starting dummy write in 9 seconds.
=08=08=08=08=08=08=08=08=08=088 seconds.
=08=08=08=08=08=08=08=08=08=087 seconds.
=08=08=08=08=08=08=08=08=08=086 seconds.
=08=08=08=08=08=08=08=08=08=085 seconds.
=08=08=08=08=08=08=08=08=08=084 seconds.
=08=08=08=08=08=08=08=08=08=083 seconds.
=08=08=08=08=08=08=08=08=08=082 seconds.
=08=08=08=08=08=08=08=08=08=081 seconds.
=08=08=08=08=08=08=08=08=08=080 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
Starting new track at sector: 0

  Track 01:   0 of 374 MB written.
/opt/schily/bin/cdrecord: Input/output error. write_teac_g1: scsi=20
sendcmd: no error
CDB:  2A 00 00 00 00 9B 00 00 1F 80
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 08 FF FF FF 6E 0A 00 00 00 14 B6 00 00 00
Sense Key: 0x8 Blank Check, Segment 0
Sense Code: 0xB6 Qual 0x00 (write address is efm area - aleady written)=20
Fru 0x0
Sense flags: Blk -146 (valid)
resid: 47104
cmd finished after 0.118s timeout 40s

Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00

/opt/schily/bin/cdrecord: Input/output error. write_teac_g1: scsi=20
sendcmd: no error
CDB:  2A 00 00 00 00 9B 00 00 01 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 08 00 00 00 9A 0A 00 00 00 14 B6 00 00 00
Sense Key: 0x8 Blank Check, Segment 0
Sense Code: 0xB6 Qual 0x00 (write address is efm area - aleady written)=20
Fru 0x0
Sense flags: Blk 154 (valid)
resid: 304
cmd finished after 0.507s timeout 40s


write track data: error after 317440 bytes
WARNING: adding dummy block to close track.
Writing  time:    7.329s
Fixating...

Fixating time:   66.247s

/opt/schily/bin/cdrecord: fifo had 197 puts and 6 gets.
/opt/schily/bin/cdrecord: fifo was 0 times empty and 2 times full, min=20
fill was 98%.