[prev in list] [next in list] [prev in thread] [next in thread] 

List:       suse-autoinstall
Subject:    [suse-autoinstall] Configuration of Graphics in Autoyast
From:       Daniel Spannbauer <ds () marco ! de>
Date:       2005-06-24 9:45:57
Message-ID: 200506241145.57834.ds () marco ! de
[Download RAW message or body]

Hello,

I'm working with Autoyast under SuSE 9.2 and it works fine.
But if I want to configure the Graphics-System all Configuration would be 
irgnord bei the new System.

My Config:

 <x11>
      <color_depth config:type="integer">16</color_depth>
      <configure_x11 config:type="boolean">true</configure_x11>
      <display_manager>kdm</display_manager>
      <enable_3d config:type="boolean">false</enable_3d>
      <monitor>
        <display>
          <max_hsync config:type="integer">65</max_hsync>
          <max_vsync config:type="integer">78</max_vsync>
          <min_hsync config:type="integer">31</min_hsync>
          <min_vsync config:type="integer">58</min_vsync>
        </display>
        <monitor_device>1024X768@70HZ</monitor_device>
        <monitor_vendor> LCD</monitor_vendor>
      </monitor>
      <resolution>1024x768</resolution>
      <window_manager>kde</window_manager>
    </x11>

After Installation the Venoder of the Monitor is Unkown, 3D is Enabled. So the 
X-Server does not start at all. After configuring it with Sax2 the X-Server 
can start.
Is there a Mistake in my Config-File? Can I set the Graphics-Card-Vendor an 
Type in the Autoyast-File?

Greetings

Daniel

-- 
Daniel Spannbauer                           EDV Systembetreuung
marco Systemanalyse und Entwicklung GmbH    Tel   +49 8333 9233-66
Auf der Wies 8, D 87727 Babenhausen         Fax   +49 8333 9233-11
http://www.marco.de/                        Email ds@marco.de


-- 
To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com
For additional commands, e-mail: suse-autoinstall-help@suse.com

[prev in list] [next in list] [prev in thread] [next in thread]