[prev in list] [next in list] [prev in thread] [next in thread] 

List:       sun-managers
Subject:    Boot time errors.
From:       Donald Gover <dlgover () yahoo ! com>
Date:       2001-01-31 14:25:38
[Download RAW message or body]

I have been given a domain in a E10k to set up and
configure. The H/W O/S people have placed 2.8 on this
system, patched it to the current recomended patches
and turned it over to me. When it boots however it
comes up with the following errors:

Jan 30 17:20:19  scsi: [ID 107833 kern.warning]
WARNING: /sbus@40,0/QLGC,isp@0,10000 (isp0):
Jan 30 17:20:19    Target 0 reducing transfer rate
Jan 30 17:20:19  scsi: [ID 107833 kern.warning]
WARNING: /sbus@40,0/QLGC,isp@0,10000 (isp0):
Jan 30 17:20:19    Parity Error
Jan 30 17:20:19  scsi: [ID 107833 kern.warning]
WARNING: /sbus@40,0/QLGC,isp@0,10000 (isp0):
Jan 30 17:20:19     Target 0 disabled wide SCSI mode
Jan 30 17:20:19  scsi: [ID 365881 kern.info]      
<SUN18G cyl 7506 alt 2 hd 19 sec 248>
Jan 30 17:20:19  scsi: [ID 107833 kern.warning]
WARNING: /sbus@40,0/QLGC,isp@0,10000 (isp0):
Jan 30 17:20:19   Parity Error


  They seem to say this is just normal don't worry
about it. But it would seem to me that if the system
is seeing a parity error at boot it can't be good. Has
anyone seen this before and is there a patch or os
setting to stop these from comming out? 

   Donald L. Gover

=====
Donald L. Gover

__________________________________________________
Get personalized email addresses from Yahoo! Mail - only $35 
a year!  http://personal.mail.yahoo.com/
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

[prev in list] [next in list] [prev in thread] [next in thread]