[prev in list] [next in list] [prev in thread] [next in thread]
List: sun-managers
Subject: Summary: AMD Sun Fire X2100 serial port access
From: "Al Saenz" <asaenz () Found-Tech ! com>
Date: 2005-11-30 18:55:06
Message-ID: BDA5DA0680DBE34FB6062B419044F2AF29F07F () exch-srv ! ftigrvsc ! com
[Download RAW message or body]
---
frm: Anthony Florendo
There is a BIOS setting that redirects to console.
---
---
frm: Marcel Knol
I do not know the X2100 yet, but it is i86pc based.
The settings are stored in the eeprom. You can see these settings
with the "eeprom" command (as root).
I use the following three commands for setting it to serial A. Default
is 9600/8N1:
eeprom ttya-ignore-cd=true
eeprom input-device=ttya
eeprom output-device=ttya
---
---Orig Question---
Hi Sun Managers,
I am trying to get console output on the serial port.
Does anyone know how to do that?
I work w/ SPARC systems that automatically send out/put to serial A when
there
is no monitor or keyboard attached.
I do get output during the BIOS startup but I think when it actually goes
into
the system logon prompt I don't get anymore output on my serial port
connection.
---
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic