[prev in list] [next in list] [prev in thread] [next in thread] 

List:       sun-managers
Subject:    Trouble with external SCSI on SUN Blade 2000
From:       "Philippe Bourdeu d'Aguerre" <bda () aime ! insa-tlse ! fr>
Date:       2003-04-15 13:42:38
[Download RAW message or body]

Hello,

I try to install an external DAT on a SUN Blade 2000. It's a SEAGATE STD124000N, DAT
DDS3 with SCSI 2 interface. I connect it through a HD68-HD50 cable but it 
doesn't work: 
- active terminator doesn't light on
- on "boot -r" I get error messages:
Apr 14 10:44:35 limoux scsi: [ID 107833 kern.warning] WARNING: /pci@8,700000/scsi@6,1 \
                (glm1):
Apr 14 10:44:35 limoux  Connected command timeout for Target 0.0
Apr 14 10:44:35 limoux genunix: [ID 408822 kern.info] NOTICE: glm1: fault detected in \
                device; service still available
Apr 14 10:44:35 limoux genunix: [ID 611667 kern.info] NOTICE: glm1: Connected command \
                timeout for Target 0.0
Apr 14 10:44:35 limoux glm: [ID 280919 kern.warning] WARNING: \
                ID[SUNWpd.glm.cmd_timeout.6017]
Apr 14 10:44:35 limoux scsi: [ID 107833 kern.warning] WARNING: /pci@8,700000/scsi@6,1 \
                (glm1):
Apr 14 10:44:35 limoux  timeout on bus reset interrupt
Apr 14 10:44:35 limoux genunix: [ID 408789 kern.warning] WARNING: glm1: fault \
                detected in device; service unavailable
Apr 14 10:44:35 limoux genunix: [ID 451854 kern.warning] WARNING: glm1: timeout on \
bus reset interrupt

- devices are not created

Can somebody confirms that SunBlade 2000 supports SCSI 2 devices ? Is there any \
necessary conf ?

Thanks.
-- 
Philippe BOURDEU d'AGUERRE
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers


[prev in list] [next in list] [prev in thread] [next in thread]