[prev in list] [next in list] [prev in thread] [next in thread]
List: strongswan-users
Subject: Re: [strongSwan] ipsec up connection name cannot works...
From: Andreas Steffen <andreas.steffen () strongswan ! org>
Date: 2008-07-25 12:41:48
Message-ID: 4889CA0C.9040608 () strongswan ! org
[Download RAW message or body]
Most probably a syntax error in your ipsec.conf file.
Execute
ipsec update
and check for error messages.
Regards
Andreas
danny dan wrote:
> hi...
> this is the result after i run the command ip route list
>
> root@vpnserver:/ <mailto:root@vpnserver:/ <root@vpnserver:/>># ip route
> list
> 219.93.36.192/26 <http://219.93.36.192/26> dev eth1 proto kernel scope
> link src 219.93.36.214 <http://219.93.36.214>
> 192.168.1.0/24 <http://192.168.1.0/24> dev eth0 proto kernel scope link
> src 192.168.1.148 <http://192.168.1.148>
> 169.254.0.0/16 <http://169.254.0.0/16> dev eth1 scope link metric 1000
> default via 192.168.1.254 <http://192.168.1.254> dev eth0 metric 100
> default via 219.93.36.193 <http://219.93.36.193> dev eth1 metric 100
> how can i delete one of this defaulte route....
>
>
> ipsec up rw
>
> but ...021 no connection named "rw"
> _______________________________________________
> Users mailing list
> Users@lists.strongswan.org
> https://lists.strongswan.org/mailman/listinfo/users
--
======================================================================
Andreas Steffen andreas.steffen@strongswan.org
strongSwan - the Linux VPN Solution! www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==
_______________________________________________
Users mailing list
Users@lists.strongswan.org
https://lists.strongswan.org/mailman/listinfo/users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic