[prev in list] [next in list] [prev in thread] [next in thread]
List: strongswan-users
Subject: [strongSwan] Road Warrior with NAT
From: bclark () blink ! homelinux ! com (Brent Clark)
Date: 2004-10-24 9:31:57
Message-ID: 417B5759.5030607 () blink ! homelinux ! com
[Download RAW message or body]
Hi all
I have finally got NAT patched in my kernel, but now to get this tunnel
to work.
Basically I would like to create like a road-warrior lan. (I have debian
box that dials up for me, and I have a few other machines that are
behind that box(MASQURADED)).
The VPN server I would like to connect to, is a Watchguard Firebox.
The IT person on that end gave me these details (Hope the info is
complete to allow me to make this work).
==========================================
Status Passphrase: "abc"
Configuration Passphrase: "abc"
DVCP Server Address: 1.2.3.4
Unique Name or ID: "xyz"
Shared Secret: "qaz"
==========================================
This, below, is my config file
==========================================
version 2.0
config setup
#interfaces="ipsec0=ppp0"
#forwardcontrol=no
klipsdebug=
plutodebug=
#manualstart=
#plutoload=%search
#plutostart=%search
#plutowait=no
conn road
type=tunnel
auth=esp
#esp=3des-md5-96
authby=secret
pfs=yes
left=%defaultroute # Picks up our dynamic IP
#leftnexthop=%defaultroute #
#leftid=@road.example.com # Local information
#leftrsasigkey=0sAQPIPN9uI... #
right=1.2.3.4 # Remote information
rightsubnet=10.0.0.0/24 #
#rightid=@xy.example.com #
#rightrsasigkey=0sAQOnwiBPt... #
auto=start # authorizes but doesn't start this
# connection at startup
==========================================
If possible could someone please assit me on this configuration.
My subnet is 192.168.2.0/24.
Any assistants would greatly be appreciated.
Kind Regards
Brent Clark
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic