[prev in list] [next in list] [prev in thread] [next in thread] 

List:       strongswan-announce
Subject:    Re: [strongSwan-dev] A hand regarding (kernel-)libipsec and Windows
From:       Noel Kuntze <noel.kuntze+strongswan-dev-ml () thermi ! consulting>
Date:       2017-08-11 21:50:20
Message-ID: 2fb1b0ab-f41c-fb0a-a1ac-fe4f8e18bd62 () thermi ! consulting
[Download RAW message or body]

Hi,

Yes, I finished it all and made it work.
Code is on my Github[1] in the strongswan and tap-windows6 repos.

Kind regards

Noel


[1] https://github.com/Thermi

On 11.08.2017 23:25, Kevin Lussier wrote:
> Hi Noel.
> I was about to venture down this same path myself. You posted your message about a \
> year ago. Were you able to make any further progress? Thanks,
> Kevin Lussier
> > Hello, I'm looking for some help regarding getting (kernel-)libipsec to work on \
> > Windows. I've already written the necessary code to interface with the \
> > TAP-Windows driver from OpenVPN and I already added code to handle the setting of \
> > the gateway field in the routes and functions to perform IO operations on the TUN \
> > handles, however, I have some problems getting it to work. The basic problem is, \
> > that despite charon receiving an ESPINUDP packet, the traffic counter does not \
> > increase and I don't get the data on the TAP device (in TUN mode) and vice versa \
> > (receiving packets on the handle of the TAP device does not work either yet). The \
> > current state of affairs is, that the negotiation of a CHILD_SA works fine, as \
> > does the installation of a route and the virtual IP. Short list of what was done: \
> > *add ifdefs and code in libstrongswan to find, open and configure TAP devices on \
> > Windows with the TAP-Windows driver *add short code for setting the GW of the \
> > routes over the TAP device on Windows *merge code from the win-vip branch *add \
> > some code to honor charon.install_virtual_ip_on *code to perform IO operations on \
> > the handles *create/copy header files for (missing) constants My code can be \
> > found on Github (https://github.com/Thermi/strongswan) in the windows-libipsec \
> > branch. If you like to help, you probably want to look at the diff from commit \
> > 1dabd0fb1cfdb5b3381d45a39a7cb134651b72a9 to HEAD. I'd greatly appreciate a \
> > helping hand that sheds some light on what I'm doing wrong or what's still \
> > missing. -- Mit freundlichen Grüßen/Kind Regards, Noel Kuntze
> 


-- 
Noel Kuntze
IT security consultant

GPG Key ID: 0x0739AD6C
Fingerprint: 3524 93BE B5F7 8E63 1372 AF2D F54E E40B 0739 AD6C


[prev in list] [next in list] [prev in thread] [next in thread]