[prev in list] [next in list] [prev in thread] [next in thread]
List: squid-users
Subject: Re: Performance
From: Scott Bethke <kbethke () ezy ! net>
Date: 1999-01-29 14:18:37
[Download RAW message or body]
At 12:36 PM 1/29/99 +0100, you wrote:
>- We use Squid on a Sun Sparc 5 Solaris 2.6 machine. We have 2 * 4 GB
>cache-disk and 128 MB memory.
What speed is the 5?? 70? 85? 110? 170?
>- We have a lot of performance problems. Response to an normal page (in
>cache = 180 bytes/s). We have an 2 MB connection to the internet. One
>and a half week ago we had the same problem, cleaning the cache helpt
>(for a week).
Slowaris may be to blame, how fast are your drives? do you run the drives
on a different SCSI controller or just on the built-in controller? Also
ram looks rather small. For Solaris in this application I'd say 256M is
the smallest
>- This is a one task machine, only Squid is running
Have you considered running a faster OS? like NetBSD or OpenBSD?
>- We have a potential 1200 users
On a microsparc II ? We have run about 1/2 a T3 worth of users through a
Sparc20, SM71, NetBSD, 256Megs Ram, dual 9gig's, separate SCSI ctrl's..
that was Squid 1.21 though.. Performance was VERY good.
Good Luck!
-Scott
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic