[prev in list] [next in list] [prev in thread] [next in thread]
List: spread-users
Subject: Re: [Spread-users] General Question
From: Per Sandberg <per.sandberg () bredband ! net>
Date: 2010-10-28 15:56:58
Message-ID: 4CC99D4A.7030203 () bredband ! net
[Download RAW message or body]
It worked fine to build on win32, I used another gcc inctance then the
one in mingw, I used the one in "GNAT GPL"
http://libre.adacore.com/libre/ and added a project file.
Ther was one patch though but it obvious when compiling and I'm
confident that i sent the patch back.
/Per
On 10/28/2010 04:20 PM, John Schultz wrote:
> I saw both questions, but I'm not familiar with Delphi or MingGW, so I refrained \
> from responding. I am not aware of any Delphi specific bindings though.
> To your question, I will say that Spread is very portable C code. If your platform \
> supports ANSI C (1989 standard), BSD sockets and select, then it should easily port \
> there. It uses autoconf scripts which should allow it to port to most *nix \
> platforms very easily. If you are in a different kind of environment, then you \
> made need to provide the appropriate #defines in the architecture specific files \
> (e.g. - arch.h). You can use the win32 portions as a guide on how to do that.
> Cheers!
>
> -----
> John Lane Schultz
> Spread Concepts LLC
> Phn: 301 830 8100
> Cell: 443 838 2200
>
> On Oct 28, 2010, at 4:22 AM, coderalpha wrote:
>
> Ok. I asked because of the lack of traffic on the mailing list. I am investigating \
> Spread on an R&D project and posted a question about building it with MinGW and \
> someone else asked a question without any replies. That is usually a sign of a dead \
> project.
>
>
> ---- On Thu, 28 Oct 2010 02:43:31 +0200 John Schultz<jschultz@spreadconcepts.com> \
> wrote ----
> Not at all. It is very mature though, so not many changes are being made any more.
>
> Cheers!
>
> -----
> John Lane Schultz
> Spread Concepts LLC
> Phn: 301 830 8100
> Cell: 443 838 2200
>
> On Oct 27, 2010, at 10:23 AM, coderalpha wrote:
>
> Is this project defunct?
>
>
>
> _______________________________________________
> Spread-users mailing list
> Spread-users@lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
>
>
>
>
>
>
> _______________________________________________
> Spread-users mailing list
> Spread-users@lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
--
Per Sandberg<br>
["per_sandberg.vcf" (text/x-vcard)]
_______________________________________________
Spread-users mailing list
Spread-users@lists.spread.org
http://lists.spread.org/mailman/listinfo/spread-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic