[prev in list] [next in list] [prev in thread] [next in thread] 

List:       sparcbook
Subject:    [SPARCbook] dumb case question
From:       sparcbook () sunhelp ! org (Keith Simonsen)
Date:       2001-01-31 13:23:56
[Download RAW message or body]

Jonathan,

I had the same thing happen to me. Except the right hinge actually locked
up, and i snapped the magnesium that holds the display onto the hinge.
I've been using it about a year like that, and it holds up real well. I
removed the hinge and tossed it (I broke it while trying to loosen it up).

I'm just careful while opening and closing the sparcbook so I don't put
too much pressure on the remaining left side hinge.

-Keith

On Tue, 30 Jan 2001, Jonathan Kalbfeld wrote:

> I couldn't find anything in the FAQ about this one so I figured I'd ask.
>
> I've got a crack developing in my sparcbook 3gs case that is exacerbated
> every time I open it.
>
> It's specifically on the right arm which connects the display top to the
> bottom, on the part where it goes from rounded to flat.  There's a crack
> right on the cusp there.
>
> If that part is severed, will it affect the sturdiness of the case, and is
> there any way to reinforce/tighten this to prevent the display from
> flopping down and making the operator very upset.  I tried crazy glue but
> it doesn't stick and only makes it worse.
>
> jonathan
>
> :wq!
>
> _______________________________________________
> Sparcbook mailing list  -  Sparcbook@sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sparcbook
>

[prev in list] [next in list] [prev in thread] [next in thread]