[prev in list] [next in list] [prev in thread] [next in thread] 

List:       sparc-redhat
Subject:    RedHat Installation on Sparc 1+
From:       Phillip Heller <pheller () mail ! csonline ! net>
Date:       1998-05-28 17:08:37
[Download RAW message or body]

OK, now I'm really stumped.  If anyone can make anything of this, I'd
appreciate it.

I've got a Hewlett Packard C2235 400 megabyte SCSI-2 drive.  I think there
may be problems with it that is causing the NFS installs to fail. 

Here is my install.log and syslog from a recent install attempt:

cat install.log
* welcome to the Red Hat install (first stage, version 1.1 built Apr 22 1997
16:03:09)
* eth0 is available -- using it for networking
* Configuring device eth0 via bootp
* using bootp for device eth0
* configuring eth0 ip: 0.0.0.0 nm: 0.0.0.0 nw: 0.0.0.0 bc: 255.255.255.255
* configuring eth0 ip: 206.101.123.40 nm: 255.255.255.128 nw: 206.101.123.0
bc: 206.101.123.127
* using nameserver to find host and domain name
* writing nameservices information to /etc/resolv.conf
* bootpc: gethostbyaddr Unknown error
* reverse name lookup failed
* writing nameservices information to /etc/resolv.conf
* mounting 206.101.123.39:/c/sparc on /tmp/rhimage as type nfs
* creating directory /tmp/rhimage rc = 0
* calling nfsmount(206.101.123.39:/c/sparc, /tmp/rhimage, &morejunk, &junk,
&mount_opt)
* 	nfsmount returned non-zero
* calling mount(206.101.123.39:/c/sparc, /tmp/rhimage, nfs, -1058209791,
0x3d440)
* mounting 206.101.123.39:/c/sparc on /tmp/rhimage as type nfs
* calling nfsmount(206.101.123.39:/c/sparc, /tmp/rhimage, &morejunk, &junk,
&mount_opt)
* calling mount(206.101.123.39:/c/sparc, /tmp/rhimage, nfs, -1058209791,
0x3d440)
* writing network information to /tmp/ifcfg-eth0
* writing network information to /tmp/network
* 	network is configured, writing complete information
* second stage install running (version 1.1 built Apr 22 1997 16:03:27)
* cannot open /dev/tty2 -- no shell will be provided
* found network config file ifcfg-eth0
* /proc/scsi/scsi: Attached devices: 
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: HP       Mo
* scsi devices are available
* successfully opened: /tmp/sda
* /proc/scsi/scsi: Attached devices: 
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: HP       Mo
* scsi devices are available
* running: /usr/bin/fdisk /usr/bin/fdisk /tmp/sda 
* found partition sda1
* found partition sda2
* found partition sda3
* making device sda2 (8, 2) as /tmp/sda2
* 	2269 bad pages

* setting up swapspace, device = sda2, size = 2412544 bytes
* making symlink from /tmp/rhimage to image
* psFromHeaderListDesc read 4


# cat syslog
socket error
<4>PROMLIB: Sun Boot Prom Version 0 Revision 0
<4>ARCH: SUN4C
<4>TYPE: Sun4c SparcStation 1+
<4>Ethernet address: 8:0:20:9:60:8e
<4>Loading sun4c MMU routines
<4>SUN4C: 59 mmu entries for the kernel
<4>sbus0: Clock 25.0 MHz
<4>dma0: Revision 1 
<4>zs0: console I/O
<4>Calibrating delay loop.. ok - 24.88 BogoMIPS
<4>Memory: 14648k available (1056k kernel code, 628k data) [f0000000,f0ff4000]
<6>Swansea University Computer Society NET3.035 for Linux 2.0
<6>NET3: Unix domain sockets 0.13 for Linux NET3.035.
<4>Swansea University Computer Society TCP/IP for NET3.034
<4>IP Protocols: IGMP, ICMP, UDP, TCP
<5>VFS: Diskquotas version dquot_5.6.0 initialized

<4>Linux version 2.0.30 (root@homer.redhat.com) (gcc version 2.7.2.1) #1 Mon
Apr 21 11:35:10 EDT 1997
<4>Sparc Zilog8530 serial driver version 1.18.2.11
<4>tty00 at 0xffd02004 (irq = 12) is a Zilog8530
<4>tty01 at 0xffd02000 (irq = 12) is a Zilog8530
<4>tty02 at 0xffd00004 (irq = 12) is a Zilog8530
<4>tty03 at 0xffd00000 (irq = 12) is a Zilog8530
<4>Sun TYPE 4 keyboard detected without keyclick
<4>Sun Mouse-Systems mouse driver version 1.00
<4>Ramdisk driver initialized : 16 ramdisks of 4096K size
<6>Floppy drive(s): fd0 is 1.44M
<4>Started kswapd v 1.14.2.1 
<6>FDC 0 is an 82072A
<4>md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
<4>linear personality registered
<4>raid0 personality registered
<4>esp0: IRQ 3 SCSI ID 7  Clock 20 MHz CCF=4 Time-Out 167 NCR53C90(esp100)
detected
<4>ESP: Total of 1 ESP hosts found, 1 actually in use.
<4>QPTI: Total of 0 PTI Qlogic/ISP hosts found, 0 actually in use.
<4>scsi0 : Sparc ESP100 (NCR53C90)
<4>scsi : 1 host.
<4>  Vendor: HP        Model: C2235             Rev: 0B11
<4>  Type:   Direct-Access                      ANSI SCSI revision: 02
<4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
<4>scsi : detected 1 SCSI disk total.
<4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 825012 [402 MB] [0.4 GB]
<4>sunlance.c:v1.9 21/Aug/96 Miguel de Icaza (miguel@nuclecu.unam.mx)
<4>eth0: LANCE 08:00:20:09:60:8e 
<4>Partition check:
<4> sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
<7>VFS: Disk change detected on device 02:00
<5>RAMDISK: Compressed image found at block 600
<4>EXT2-fs warning: checktime reached, running e2fsck is recommended
<4>VFS: Mounted root (ext2 filesystem).
<4>Freeing unused kernel memory: 36k code, 4k data
<4>nfs_read_super: not a socket
<4>SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 28000000
<4>Current error sd08:02: sense key Illegal Request
<4>Additional sense indicates Logical block address out of range
<4>scsidisk I/O error: dev 08:02, sector 4688
<4>SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 28000000
<4>Current error sd08:02: sense key Illegal Request
<4>Additional sense indicates Logical block address out of range
<4>scsidisk I/O error: dev 08:02, sector 4690

The last 4 lines repeat over and over again, each time the sector increasing
by two.

Any suggestions?


-- 
To unsubscribe: mail -s unsubscribe sparc-list-request@redhat.com < /dev/null

[prev in list] [next in list] [prev in thread] [next in thread]