[prev in list] [next in list] [prev in thread] [next in thread] 

List:       soekris-tech
Subject:    [Soekris] net6501 - OpenBSD 5.0
From:       Wim Vandeputte Mailing list only <bunbun () kd85 ! com>
Date:       2011-09-12 23:30:07
Message-ID: 20110912233007.GB14739 () rho ! kd85 ! com
[Download RAW message or body]



Hey,

Same setup here, but this time running OpenBSD 5.0 (to be released 1st of
November)

POST: 0123456789bcefghips1234ajklnopqr,,,tvwxy

comBIOS ver. 1.40a  20110906  Copyright (C) 2000-2011 Soekris Engineering.

net6501

CPU Atom E6xx 1009 Mhz 1024 Mbyte Memory

Initializing Intel(R) Boot Agent GE v1.3.72
PXE 2.1 Build 089 (WfM 2.0)

SATA AHCI BIOS ver. 0.6 20110902  Copyright (C) 2003-2011 Intel Corporation

Controller Bus#02, Device#06, Function#00: 02 Ports, 01 Devices
  Port-00: Hard Disk, KingSpec KSD-SA25.1-016SJ      
  Port-01: No device detected

 Slot   Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1    Base2   Int 
--------------------------------------------------------------------
00:00:0 8086 4114 06000003 0007 0000 00 00 00 00000000 00000000 
00:23:0 8086 8184 06040000 0107 0010 08 00 01 1FFF1000 A0FFA000 10
00:24:0 8086 8185 06040000 0107 0010 08 00 01 3FFF2000 A2FFA100 11
00:25:0 8086 8180 06040000 0107 0010 08 00 01 5FFF4000 A4FFA300 05
00:26:0 8086 8181 06040000 0107 0010 08 00 01 0FFF1000 00FFA000 09
00:31:0 8086 8186 06010000 0003 0000 00 00 80 00000000 00000000 
02:02:0 8086 8804 0C031001 0106 0010 00 00 80 A0000900 00000000 09
02:02:1 8086 8805 0C031001 0106 0010 00 00 80 A0000A00 00000000 09
02:02:2 8086 8806 0C031001 0106 0010 00 00 80 A0000B00 00000000 09
02:02:3 8086 8807 0C032001 0106 0010 00 00 80 A0000C00 00000000 09
02:06:0 8086 880B 01060101 0107 0010 00 00 00 00000000 00000000 11
02:08:0 8086 880C 0C031001 0106 0010 00 00 80 A0004400 00000000 10
02:08:1 8086 880D 0C031001 0106 0010 00 00 80 A0004500 00000000 10
02:08:2 8086 880E 0C031001 0106 0010 00 00 80 A0004600 00000000 10
02:08:3 8086 880F 0C032001 0106 0010 00 00 80 A0004700 00000000 10
02:10:1 8086 8811 07000200 0107 0010 00 00 80 00001021 A0004800 09
02:10:2 8086 8812 07000200 0107 0010 00 00 80 00001029 A0004810 09
02:12:2 8086 8817 0C800000 0106 0010 00 00 80 00000000 A0004900 05
02:12:3 8086 8818 0C090000 0106 0010 00 00 80 00000000 A0004A00 05
03:00:0 111D 803A 0604000E 0107 0010 08 00 01 3FFF2000 A2FFA100 
05:00:0 8086 10D3 02000000 0107 0010 08 00 00 A1000000 00000000 09
06:00:0 8086 10D3 02000000 0107 0010 08 00 00 A2000000 00000000 10
08:00:0 111D 803A 0604000E 0107 0010 08 00 01 5FFF4000 A4FFA300 
10:00:0 8086 10D3 02000000 0107 0010 08 00 00 A3000000 00000000 10
11:00:0 8086 10D3 02000000 0107 0010 08 00 00 A4000000 00000000 11

   Seconds to automatic boot.   Press Ctrl-P for entering Monitor. 5 4 3 2 1
Using drive 0, partition 3.
Loading...
probing: pc0 com0 pci mem[632K 1023M a20=on] 
disk: hd0+
> > OpenBSD/i386 BOOT 3.17
switching console to com0
> > OpenBSD/i386 BOOT 3.17
boot> 
booting hd0a:/bsd: 8192892|+1088776[61+367888-+353319|]=0x98a398
entry point at 0x200120

[ using 721684 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU @ 1.00GHz ("GenuineIntel" 686-class) 1.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI \
,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
 real mem  = 1073274880 (1023MB)
avail mem = 1045667840 (997MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/10/06, BIOS32 rev. 0 @ 0xfac40
bios0: MP Configuration Table checksum mismatch
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #13 is the last bus
bios0: ROM list: 0xc8000/0xee00 0xd7000/0x2400
cpu0 at mainbus0: (uniprocessor)
cpu0: unknown i686 model 0x26, can't get bus clock (0x41880000)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x4114 rev 0x03
pchb1 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x8183 rev 0x00
ppb0 at pci0 dev 23 function 0 vendor "Intel", unknown product 0x8184 rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "Intel", unknown product 0x8800 rev 0x01
pci2 at ppb1 bus 2
io address conflict 0x5800/0x20
mem address conflict 0x40000000/0x200
mem address conflict 0x40000200/0x200
mem address conflict 0x40000400/0x200
mem address conflict 0x40000600/0x100
io address conflict 0x5820/0x8
mem address conflict 0x40000700/0x10
io address conflict 0x5828/0x8
mem address conflict 0x40000710/0x10
mem address conflict 0x40000800/0x100
mem address conflict 0x40000720/0x20
mem address conflict 0x40000900/0x100
vendor "Intel", unknown product 0x8801 (class undefined unknown subclass 0x00, rev \
0x01) at pci2 dev 0 function 0 not configured vendor "Intel", unknown product 0x8802 \
(class network subclass ethernet, rev 0x01) at pci2 dev 0 function 1 not configured \
vendor "Intel", unknown product 0x8803 (class undefined unknown subclass 0x00, rev \
0x00) at pci2 dev 0 function 2 not configured ohci0 at pci2 dev 2 function 0 vendor \
"Intel", unknown product 0x8804 rev 0x01: irq 9, version 1.0, legacy support ohci1 at \
pci2 dev 2 function 1 vendor "Intel", unknown product 0x8805 rev 0x01: irq 9, version \
1.0, legacy support ohci2 at pci2 dev 2 function 2 vendor "Intel", unknown product \
0x8806 rev 0x01: irq 9, version 1.0, legacy support ehci0 at pci2 dev 2 function 3 \
vendor "Intel", unknown product 0x8807 rev 0x01: irq 9 usb0 at ehci0: USB revision \
2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
vendor "Intel", unknown product 0x8808 (class serial bus subclass USB, rev 0x01) at \
pci2 dev 2 function 4 not configured sdhc0 at pci2 dev 4 function 0 vendor "Intel", \
unknown product 0x8809 rev 0x01: can't map interrupt sdhc1 at pci2 dev 4 function 1 \
vendor "Intel", unknown product 0x880a rev 0x01: can't map interrupt ahci0 at pci2 \
dev 6 function 0 vendor "Intel", unknown product 0x880b rev 0x01: irq 11, AHCI 1.1 \
scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, KingSpec KSD-SA2, > \
                SCSI3 0/direct fixed \
                t10.ATA_KingSpec_KSD-SA25.1-016SJ_KSS000000001CCB_
sd0: 15360MB, 512 bytes/sector, 31457280 sectors
ohci3 at pci2 dev 8 function 0 vendor "Intel", unknown product 0x880c rev 0x01: irq \
10, version 1.0, legacy support ohci4 at pci2 dev 8 function 1 vendor "Intel", \
unknown product 0x880d rev 0x01: irq 10, version 1.0, legacy support ohci5 at pci2 \
dev 8 function 2 vendor "Intel", unknown product 0x880e rev 0x01: irq 10, version \
1.0, legacy support ehci1 at pci2 dev 8 function 3 vendor "Intel", unknown product \
0x880f rev 0x01: irq 10 usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
vendor "Intel", unknown product 0x8810 (class undefined unknown subclass 0x00, rev \
0x00) at pci2 dev 10 function 0 not configured vendor "Intel", unknown product 0x8811 \
(class communications subclass serial, rev 0x00) at pci2 dev 10 function 1 not \
configured vendor "Intel", unknown product 0x8812 (class communications subclass \
serial, rev 0x00) at pci2 dev 10 function 2 not configured vendor "Intel", unknown \
product 0x8813 (class communications subclass serial, rev 0x00) at pci2 dev 10 \
function 3 not configured vendor "Intel", unknown product 0x8814 (class \
communications subclass serial, rev 0x00) at pci2 dev 10 function 4 not configured \
vendor "Intel", unknown product 0x8815 (class undefined unknown subclass 0x00, rev \
0x00) at pci2 dev 12 function 0 not configured vendor "Intel", unknown product 0x8816 \
(class serial bus unknown subclass 0x80, rev 0x00) at pci2 dev 12 function 1 not \
configured vendor "Intel", unknown product 0x8817 (class serial bus unknown subclass \
0x80, rev 0x00) at pci2 dev 12 function 2 not configured vendor "Intel", unknown \
product 0x8818 (class serial bus subclass CANbus, rev 0x00) at pci2 dev 12 function 3 \
not configured vendor "Intel", unknown product 0x8819 (class undefined unknown \
subclass 0x00, rev 0x01) at pci2 dev 12 function 4 not configured usb2 at ohci0: USB \
revision 1.0 uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb7 at ohci5: USB revision 1.0
uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
ppb2 at pci0 dev 24 function 0 vendor "Intel", unknown product 0x8185 rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci4 at ppb3 bus 4
ppb4 at pci4 dev 2 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 9, address \
00:00:24:ce:45:74 ppb5 at pci4 dev 3 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci6 at ppb5 bus 6
em1 at pci6 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 10, address \
00:00:24:ce:45:75 ppb6 at pci4 dev 4 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci7 at ppb6 bus 7
ppb7 at pci0 dev 25 function 0 vendor "Intel", unknown product 0x8180 rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci10 at ppb9 bus 10
em2 at pci10 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 10, address \
00:00:24:ce:45:76 ppb10 at pci9 dev 3 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci11 at ppb10 bus 11
em3 at pci11 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 11, address \
00:00:24:ce:45:77 ppb11 at pci9 dev 4 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci12 at ppb11 bus 12
ppb12 at pci0 dev 26 function 0 vendor "Intel", unknown product 0x8181 rev 0x00
pci13 at ppb12 bus 13
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x8186 rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (8b8b62ebcc2713e8.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (8b8b62ebcc2713e8.a): file system is clean; not checking
/dev/sd0k (8b8b62ebcc2713e8.k): file system is clean; not checking
/dev/sd0d (8b8b62ebcc2713e8.d): file system is clean; not checking
/dev/sd0f (8b8b62ebcc2713e8.f): file system is clean; not checking
/dev/sd0g (8b8b62ebcc2713e8.g): file system is clean; not checking
/dev/sd0h (8b8b62ebcc2713e8.h): file system is clean; not checking
/dev/sd0j (8b8b62ebcc2713e8.j): file system is clean; not checking
/dev/sd0i (8b8b62ebcc2713e8.i): file system is clean; not checking
/dev/sd0e (8b8b62ebcc2713e8.e): file system is clean; not checking
setting tty flags
pf enabled
starting network
DHCPDISCOVER on em0 to 255.255.255.255 port 67 interval 1
DHCPOFFER from 10.0.0.1 (00:0d:60:76:ab:5f)
DHCPREQUEST on em0 to 255.255.255.255 port 67
DHCPACK from 10.0.0.1 (00:0d:60:76:ab:5f)
bound to 10.0.0.10 -- renewal in 60 seconds.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd sendmail inetd.
starting local daemons: cron.
Wed Aug 17 18:32:34 CEST 2011

OpenBSD/i386 (soekris.kd85.com) (tty00)

login: root
Password:
Last login: Wed Aug 17 18:30:13 on tty00
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011

Welcome to OpenBSD: The proactively secure Unix-like operating system.

Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code.  With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.

You have mail.
# ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33196
        priority: 0
        groups: lo
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet 127.0.0.1 netmask 0xff000000
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:00:24:ce:45:74
        priority: 0
        groups: egress
        media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
        status: active
        inet6 fe80::200:24ff:fece:4574%em0 prefixlen 64 scopeid 0x1
        inet 10.0.0.10 netmask 0xffffff00 broadcast 10.0.0.255
em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:00:24:ce:45:75
        priority: 0
        media: Ethernet autoselect (none)
        status: no carrier
em2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:00:24:ce:45:76
        priority: 0
        media: Ethernet autoselect (none)
        status: no carrier
em3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:00:24:ce:45:77
        priority: 0
        media: Ethernet autoselect (none)
        status: no carrier
enc0: flags=0<>
        priority: 0
        groups: enc
        status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33196
        priority: 0
        groups: pflog
# cat /var/run/dmesg.boot 
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU @ 1.00GHz ("GenuineIntel" 686-class) 1.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI \
,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
 real mem  = 1073274880 (1023MB)
avail mem = 1045667840 (997MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/10/06, BIOS32 rev. 0 @ 0xfac40
bios0: MP Configuration Table checksum mismatch
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #13 is the last bus
bios0: ROM list: 0xc8000/0xee00 0xd7000/0x2400
cpu0 at mainbus0: (uniprocessor)
cpu0: unknown i686 model 0x26, can't get bus clock (0x41880000)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x4114 rev 0x03
pchb1 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x8183 rev 0x00
ppb0 at pci0 dev 23 function 0 vendor "Intel", unknown product 0x8184 rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "Intel", unknown product 0x8800 rev 0x01
pci2 at ppb1 bus 2
io address conflict 0x5800/0x20
mem address conflict 0x40000000/0x200
mem address conflict 0x40000200/0x200
mem address conflict 0x40000400/0x200
mem address conflict 0x40000600/0x100
io address conflict 0x5820/0x8
mem address conflict 0x40000700/0x10
io address conflict 0x5828/0x8
mem address conflict 0x40000710/0x10
mem address conflict 0x40000800/0x100
mem address conflict 0x40000720/0x20
mem address conflict 0x40000900/0x100
vendor "Intel", unknown product 0x8801 (class undefined unknown subclass 0x00, rev \
0x01) at pci2 dev 0 function 0 not configured vendor "Intel", unknown product 0x8802 \
(class network subclass ethernet, rev 0x01) at pci2 dev 0 function 1 not configured \
vendor "Intel", unknown product 0x8803 (class undefined unknown subclass 0x00, rev \
0x00) at pci2 dev 0 function 2 not configured ohci0 at pci2 dev 2 function 0 vendor \
"Intel", unknown product 0x8804 rev 0x01: irq 9, version 1.0, legacy support ohci1 at \
pci2 dev 2 function 1 vendor "Intel", unknown product 0x8805 rev 0x01: irq 9, version \
1.0, legacy support ohci2 at pci2 dev 2 function 2 vendor "Intel", unknown product \
0x8806 rev 0x01: irq 9, version 1.0, legacy support ehci0 at pci2 dev 2 function 3 \
vendor "Intel", unknown product 0x8807 rev 0x01: irq 9 usb0 at ehci0: USB revision \
2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
vendor "Intel", unknown product 0x8808 (class serial bus subclass USB, rev 0x01) at \
pci2 dev 2 function 4 not configured sdhc0 at pci2 dev 4 function 0 vendor "Intel", \
unknown product 0x8809 rev 0x01: can't map interrupt sdhc1 at pci2 dev 4 function 1 \
vendor "Intel", unknown product 0x880a rev 0x01: can't map interrupt ahci0 at pci2 \
dev 6 function 0 vendor "Intel", unknown product 0x880b rev 0x01: irq 11, AHCI 1.1 \
scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, KingSpec KSD-SA2, > \
                SCSI3 0/direct fixed \
                t10.ATA_KingSpec_KSD-SA25.1-016SJ_KSS000000001CCB_
sd0: 15360MB, 512 bytes/sector, 31457280 sectors
ohci3 at pci2 dev 8 function 0 vendor "Intel", unknown product 0x880c rev 0x01: irq \
10, version 1.0, legacy support ohci4 at pci2 dev 8 function 1 vendor "Intel", \
unknown product 0x880d rev 0x01: irq 10, version 1.0, legacy support ohci5 at pci2 \
dev 8 function 2 vendor "Intel", unknown product 0x880e rev 0x01: irq 10, version \
1.0, legacy support ehci1 at pci2 dev 8 function 3 vendor "Intel", unknown product \
0x880f rev 0x01: irq 10 usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
vendor "Intel", unknown product 0x8810 (class undefined unknown subclass 0x00, rev \
0x00) at pci2 dev 10 function 0 not configured vendor "Intel", unknown product 0x8811 \
(class communications subclass serial, rev 0x00) at pci2 dev 10 function 1 not \
configured vendor "Intel", unknown product 0x8812 (class communications subclass \
serial, rev 0x00) at pci2 dev 10 function 2 not configured vendor "Intel", unknown \
product 0x8813 (class communications subclass serial, rev 0x00) at pci2 dev 10 \
function 3 not configured vendor "Intel", unknown product 0x8814 (class \
communications subclass serial, rev 0x00) at pci2 dev 10 function 4 not configured \
vendor "Intel", unknown product 0x8815 (class undefined unknown subclass 0x00, rev \
0x00) at pci2 dev 12 function 0 not configured vendor "Intel", unknown product 0x8816 \
(class serial bus unknown subclass 0x80, rev 0x00) at pci2 dev 12 function 1 not \
configured vendor "Intel", unknown product 0x8817 (class serial bus unknown subclass \
0x80, rev 0x00) at pci2 dev 12 function 2 not configured vendor "Intel", unknown \
product 0x8818 (class serial bus subclass CANbus, rev 0x00) at pci2 dev 12 function 3 \
not configured vendor "Intel", unknown product 0x8819 (class undefined unknown \
subclass 0x00, rev 0x01) at pci2 dev 12 function 4 not configured usb2 at ohci0: USB \
revision 1.0 uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb7 at ohci5: USB revision 1.0
uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
ppb2 at pci0 dev 24 function 0 vendor "Intel", unknown product 0x8185 rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci4 at ppb3 bus 4
ppb4 at pci4 dev 2 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 9, address \
00:00:24:ce:45:74 ppb5 at pci4 dev 3 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci6 at ppb5 bus 6
em1 at pci6 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 10, address \
00:00:24:ce:45:75 ppb6 at pci4 dev 4 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci7 at ppb6 bus 7
ppb7 at pci0 dev 25 function 0 vendor "Intel", unknown product 0x8180 rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci10 at ppb9 bus 10
em2 at pci10 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 10, address \
00:00:24:ce:45:76 ppb10 at pci9 dev 3 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci11 at ppb10 bus 11
em3 at pci11 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 11, address \
00:00:24:ce:45:77 ppb11 at pci9 dev 4 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci12 at ppb11 bus 12
ppb12 at pci0 dev 26 function 0 vendor "Intel", unknown product 0x8181 rev 0x00
pci13 at ppb12 bus 13
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x8186 rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (8b8b62ebcc2713e8.a) swap on sd0b dump on sd0b
syncing disks... 
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU @ 1.00GHz ("GenuineIntel" 686-class) 1.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI \
,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
 real mem  = 1073274880 (1023MB)
avail mem = 1045667840 (997MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/10/06, BIOS32 rev. 0 @ 0xfac40
bios0: MP Configuration Table checksum mismatch
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #13 is the last bus
bios0: ROM list: 0xc8000/0xee00 0xd7000/0x2400
cpu0 at mainbus0: (uniprocessor)
cpu0: unknown i686 model 0x26, can't get bus clock (0x41880000)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x4114 rev 0x03
pchb1 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x8183 rev 0x00
ppb0 at pci0 dev 23 function 0 vendor "Intel", unknown product 0x8184 rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "Intel", unknown product 0x8800 rev 0x01
pci2 at ppb1 bus 2
io address conflict 0x5800/0x20
mem address conflict 0x40000000/0x200
mem address conflict 0x40000200/0x200
mem address conflict 0x40000400/0x200
mem address conflict 0x40000600/0x100
io address conflict 0x5820/0x8
mem address conflict 0x40000700/0x10
io address conflict 0x5828/0x8
mem address conflict 0x40000710/0x10
mem address conflict 0x40000800/0x100
mem address conflict 0x40000720/0x20
mem address conflict 0x40000900/0x100
vendor "Intel", unknown product 0x8801 (class undefined unknown subclass 0x00, rev \
0x01) at pci2 dev 0 function 0 not configured vendor "Intel", unknown product 0x8802 \
(class network subclass ethernet, rev 0x01) at pci2 dev 0 function 1 not configured \
vendor "Intel", unknown product 0x8803 (class undefined unknown subclass 0x00, rev \
0x00) at pci2 dev 0 function 2 not configured ohci0 at pci2 dev 2 function 0 vendor \
"Intel", unknown product 0x8804 rev 0x01: irq 9, version 1.0, legacy support ohci1 at \
pci2 dev 2 function 1 vendor "Intel", unknown product 0x8805 rev 0x01: irq 9, version \
1.0, legacy support ohci2 at pci2 dev 2 function 2 vendor "Intel", unknown product \
0x8806 rev 0x01: irq 9, version 1.0, legacy support ehci0 at pci2 dev 2 function 3 \
vendor "Intel", unknown product 0x8807 rev 0x01: irq 9 usb0 at ehci0: USB revision \
2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
vendor "Intel", unknown product 0x8808 (class serial bus subclass USB, rev 0x01) at \
pci2 dev 2 function 4 not configured sdhc0 at pci2 dev 4 function 0 vendor "Intel", \
unknown product 0x8809 rev 0x01: can't map interrupt sdhc1 at pci2 dev 4 function 1 \
vendor "Intel", unknown product 0x880a rev 0x01: can't map interrupt ahci0 at pci2 \
dev 6 function 0 vendor "Intel", unknown product 0x880b rev 0x01: irq 11, AHCI 1.1 \
scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, KingSpec KSD-SA2, > \
                SCSI3 0/direct fixed \
                t10.ATA_KingSpec_KSD-SA25.1-016SJ_KSS000000001CCB_
sd0: 15360MB, 512 bytes/sector, 31457280 sectors
ohci3 at pci2 dev 8 function 0 vendor "Intel", unknown product 0x880c rev 0x01: irq \
10, version 1.0, legacy support ohci4 at pci2 dev 8 function 1 vendor "Intel", \
unknown product 0x880d rev 0x01: irq 10, version 1.0, legacy support ohci5 at pci2 \
dev 8 function 2 vendor "Intel", unknown product 0x880e rev 0x01: irq 10, version \
1.0, legacy support ehci1 at pci2 dev 8 function 3 vendor "Intel", unknown product \
0x880f rev 0x01: irq 10 usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
vendor "Intel", unknown product 0x8810 (class undefined unknown subclass 0x00, rev \
0x00) at pci2 dev 10 function 0 not configured vendor "Intel", unknown product 0x8811 \
(class communications subclass serial, rev 0x00) at pci2 dev 10 function 1 not \
configured vendor "Intel", unknown product 0x8812 (class communications subclass \
serial, rev 0x00) at pci2 dev 10 function 2 not configured vendor "Intel", unknown \
product 0x8813 (class communications subclass serial, rev 0x00) at pci2 dev 10 \
function 3 not configured vendor "Intel", unknown product 0x8814 (class \
communications subclass serial, rev 0x00) at pci2 dev 10 function 4 not configured \
vendor "Intel", unknown product 0x8815 (class undefined unknown subclass 0x00, rev \
0x00) at pci2 dev 12 function 0 not configured vendor "Intel", unknown product 0x8816 \
(class serial bus unknown subclass 0x80, rev 0x00) at pci2 dev 12 function 1 not \
configured vendor "Intel", unknown product 0x8817 (class serial bus unknown subclass \
0x80, rev 0x00) at pci2 dev 12 function 2 not configured vendor "Intel", unknown \
product 0x8818 (class serial bus subclass CANbus, rev 0x00) at pci2 dev 12 function 3 \
not configured vendor "Intel", unknown product 0x8819 (class undefined unknown \
subclass 0x00, rev 0x01) at pci2 dev 12 function 4 not configured usb2 at ohci0: USB \
revision 1.0 uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb7 at ohci5: USB revision 1.0
uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
ppb2 at pci0 dev 24 function 0 vendor "Intel", unknown product 0x8185 rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci4 at ppb3 bus 4
ppb4 at pci4 dev 2 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 9, address \
00:00:24:ce:45:74 ppb5 at pci4 dev 3 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci6 at ppb5 bus 6
em1 at pci6 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 10, address \
00:00:24:ce:45:75 ppb6 at pci4 dev 4 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci7 at ppb6 bus 7
ppb7 at pci0 dev 25 function 0 vendor "Intel", unknown product 0x8180 rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 vendor "IDT", unknown product 0x803a rev 0x0e
pci10 at ppb9 bus 10
em2 at pci10 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 10, address \
00:00:24:ce:45:76 ppb10 at pci9 dev 3 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci11 at ppb10 bus 11
em3 at pci11 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 11, address \
00:00:24:ce:45:77 ppb11 at pci9 dev 4 function 0 vendor "IDT", unknown product 0x803a \
rev 0x0e pci12 at ppb11 bus 12
ppb12 at pci0 dev 26 function 0 vendor "Intel", unknown product 0x8181 rev 0x00
pci13 at ppb12 bus 13
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x8186 rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (8b8b62ebcc2713e8.a) swap on sd0b dump on sd0b
# reboot
/etc/rc.shutdown in progress...
/etc/rc.shutdown complete.
syncing disks... done
rebooting...

POST: 012345


when rebooting, the ComBIOS hangs at POST: 012345

With kind regards,

Wim.
_______________________________________________
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech


[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic