[prev in list] [next in list] [prev in thread] [next in thread]
List: soekris-tech
Subject: Re: [Soekris] Ethernet Power/Requirements
From: "Michael Scheliga" <Mike () scheliga ! com>
Date: 2006-11-10 7:35:15
Message-ID: E224AFE9303FFF4F80E5101B367CF4F505A496 () feynman ! nosync ! home
[Download RAW message or body]
> -----Original Message-----
> From: soekris-tech-bounces@lists.soekris.com [mailto:soekris-tech-
> bounces@lists.soekris.com] On Behalf Of Aaron
> Sent: Thursday, November 09, 2006 9:36 PM
> To: soekris-tech@lists.soekris.com
> Subject: [Soekris] Ethernet Power/Requirements
>
> Thanks for all the replies. I found that you have to have atleast 12V
of
> power for the ethernet adapter to work. Now the link light shows... I
> guess
> the next question is how to re-flash the onboard flash without knowing
the
> root password? (I got this board used... ;)
> Thanks.
>
> Aaron
>
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech@lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
PXE boot it and install another OS.
There is a ton of info in the archives and on Google.
It is worth learning how to set this up if you're going to support
these.
Mike
_______________________________________________
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic