[prev in list] [next in list] [prev in thread] [next in thread]
List: smartmontools-support
Subject: [smartmontools-support] Need help with smartctl output
From: gijsbert () ophetnet ! nl
Date: 2014-04-18 13:15:25
Message-ID: 1D589E0E-9613-4ED5-ABDD-0FE09E7559BC () ophetnet ! nl
[Download RAW message or body]
Dear readers,
Checking a harddrive using smartctl -A /dev/sdX results in a nice table with id and \
attributes like so:
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED \
WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 077 063 044 Pre-fail \
Always - 56776869 3 Spin_Up_Time 0x0003 100 100 000 \
Pre-fail Always - 0
However, on some servers I receive a completely different output using the same \
version of smartmontools. Below is an example:
--
smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.18-371.6.1.el5] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: SEAGATE
Product: ST9300605SS
Revision: 0002
User Capacity: 300,000,000,000 bytes [300 GB]
Logical block size: 512 bytes
Logical Unit id: 0x5000c5004bb62a0f
Serial number: 6XP2FK730000M233QACC
Device type: disk
Transport protocol: SAS
Local Time is: Fri Apr 18 15:13:13 2014 CEST
Device supports SMART and is Enabled
Temperature Warning Enabled
SMART Health Status: OK
Current Drive Temperature: 36 C
Drive Trip Temperature: 68 C
Manufactured in week 10 of year 2012
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 8
Specified load-unload count over device lifetime: 300000
Accumulated load-unload cycles: 8
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 3424156415
Blocks received from initiator = 2906714357
Blocks read from cache and sent to initiator = 120574148
Number of read and write commands whose size <= segment size = 85394131
Number of read and write commands whose size > segment size = 11
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 14491.72
number of minutes until next internal SMART test = 11
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed \
uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 1521076288 0 0 1521076288 0 25920.949 \
0
write: 0 0 0 0 0 1543.290 0
Non-medium error count: 6
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged
Long (extended) Self Test duration: 2520 seconds [42.0 minutes]
—
I tried a lot of things, but I cannot get the table with id’s and attributes. Does \
someone know why this output differs and what I can do to get the table with id’s and \
attributes.
Kind regards and thanks in advance for your reply,
Gijsbert Rochat
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/NeoTech
_______________________________________________
Smartmontools-support mailing list
Smartmontools-support@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-support
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic