[prev in list] [next in list] [prev in thread] [next in thread]
List: smartmontools-support
Subject: Re: [smartmontools-support] LibPATA code issues / 2.6.16
From: Justin Piszcz <jpiszcz () lucidpixels ! com>
Date: 2006-06-11 11:13:38
Message-ID: Pine.LNX.4.64.0606110712350.3276 () p34 ! internal ! lan
[Download RAW message or body]
[4597362.011000] ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ
0xb/00/00
[4597362.011000] ata3: status=0x51 { DriveReady SeekComplete Error }
[4597362.011000] ata3: error=0x04 { DriveStatusError }
Now under 2.6.16.20. (was doing an rsync from 1 drive (IDE) -> to this
SATA) drive.
The SATA drive AFAIK does not have any issues, no bad sectors/etc, still
the same drive as before, but this is the new one from the previous RMA.
Just FYI.
On Fri, 21 Apr 2006, Linus Torvalds wrote:
>
>
> On Fri, 21 Apr 2006, Jeff Garzik wrote:
>
>>
>> Agreed, though the original poster had already done a 400GB dd from
>> /dev/zero...
>
> Yes, but to a _file_ on the partition (ie he didn't overwrite any existign
> data, just the empty parts of a filesystem).
>
> I realize that it's not enough for the "re-allocate on write" behaviour,
> and for that you really _do_ need to re-write the whole disk to get all
> the broken blocks reallocated, but my argument was just that we should
> make sure to _tell_ people when they are overwriting all their old data ;)
>
> Linus
>
_______________________________________________
Smartmontools-support mailing list
Smartmontools-support@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-support
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic