[prev in list] [next in list] [prev in thread] [next in thread]
List: smartmontools-support
Subject: [smartmontools-support]lifetime always same
From: Gregory Mokhin <mok () kde ! ru>
Date: 2005-08-14 3:38:54
Message-ID: 42FEBCCE.7020500 () kde ! ru
[Download RAW message or body]
The results of the long tests as always shown as follows:
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 3067 -
# 2 Extended offline Completed without error 00% 3067 -
# 3 etc.
Lifetime is always the same. Is it possible to get the correct results
somehow?
The complete output of # smartctl -a /dev/hda is given below for the
reference. Errors at 3067 hrs were due to power failure. Is it
possible to get rid of displaying these errors?
Regards,
Gregory
//****************************************
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 33073U4
Serial Number: N406JT4C
Firmware Version: BAC51KJ0
User Capacity: 30,735,581,184 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 0
Local Time is: Sun Aug 14 06:31:55 2005 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection
upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging
support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 25) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age
Always - 12885242397
3 Spin_Up_Time 0x0027 253 239 063 Pre-fail
Always - 85
4 Start_Stop_Count 0x0032 252 252 000 Old_age
Always - 3644
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail
Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail
Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age
Always - 94607
8 Seek_Time_Performance 0x0027 242 231 187 Pre-fail
Always - 211338162952568
9 Power_On_Minutes 0x0032 244 244 000 Old_age
Always - 3272h+11m
10 Spin_Retry_Count 0x002b 253 252 223 Pre-fail
Always - 69
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail
Always - 87
12 Power_Cycle_Count 0x0032 245 245 000 Old_age
Always - 3309
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age
Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age
Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age
Offline - 24064
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age
Always - 250265
201 Soft_Read_Error_Rate 0x000a 253 245 000 Old_age
Always - 340509
202 TA_Increase_Count 0x000a 253 252 000 Old_age
Always - 340509
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail
Always - 340509
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age
Always - 340509
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age
Always - 340509
207 Spin_High_Current 0x002a 253 252 000 Old_age
Always - 69
208 Spin_Buzz 0x002a 253 252 000 Old_age
Always - 69
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age
Offline - 0
96 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline - 0
97 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline - 0
98 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline - 0
Warning: device does not support Error Logging
SMART Error Log Version: 1
ATA Error Count: 3745 (device log contains only the most recent five
errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3745 occurred at disk power-on lifetime: 3067 hours (127 days +
19 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 aa 00 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 aa 00 a0 00 00:03:27.792 IDENTIFY PACKET DEVICE
Error 3744 occurred at disk power-on lifetime: 3067 hours (127 days +
19 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 aa 00 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 aa 00 a0 00 00:03:27.824 IDENTIFY PACKET DEVICE
Error 3743 occurred at disk power-on lifetime: 3067 hours (127 days +
19 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 aa 00 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 aa 00 a0 08 03:49:39.968 IDENTIFY PACKET DEVICE
ca 00 08 97 db 01 e0 08 03:49:26.144 WRITE DMA
ca 00 08 a7 d5 01 e0 08 03:49:26.144 WRITE DMA
ca 00 08 7f d5 01 e0 08 03:49:26.144 WRITE DMA
ca 00 08 cf 73 01 e0 08 03:49:26.144 WRITE DMA
Error 3742 occurred at disk power-on lifetime: 3067 hours (127 days +
19 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 aa 00 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 aa 00 a0 00 00:03:27.792 IDENTIFY PACKET DEVICE
Error 3741 occurred at disk power-on lifetime: 3067 hours (127 days +
19 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 aa 00 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 aa 00 a0 00 00:03:27.792 IDENTIFY PACKET DEVICE
Warning: device does not support Self Test Logging
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 3067
-
# 2 Extended offline Completed without error 00% 3067
-
# 3 Extended offline Completed without error 00% 3067
-
# 4 Extended offline Completed without error 00% 3067
-
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Smartmontools-support mailing list
Smartmontools-support@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-support
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic