[prev in list] [next in list] [prev in thread] [next in thread] 

List:       smartmontools-support
Subject:    Re: [smartmontools-support]Help with smartmontools 5.32 on Linux kernel 2.6.11.11
From:       Martin Weinberg <martin.weinberg () comcast ! net>
Date:       2005-06-11 18:02:52
Message-ID: 20050611180252.GA7237 () eaglet ! home ! net
[Download RAW message or body]

Ok, I scrutinized changelogs and realize that I need version 5.33
for this to work.  No problems now!!

On Fri, Jun 10, 2005 at 07:47:42PM -0400, Martin Weinberg wrote:
> Folks,
>
> I've got an md array of 8 drives on a 3ware 7506 controller.  The
> array is working fine but smartctl isn't working for me.  The disks
> are Maxtor 160GB ATA.
>
> Here is the output:
>
> =====================================================================>
> # smartctl -a -d scsi /dev/twe0
> smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> Standard Inquiry failed [Inappropriate ioctl for device]
> A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
> kestrel:/usr/share/doc/smartmontools# smartctl -a -d 3ware,0 /dev/twe0
> smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> WARNING - NO DEVICE FOUND ON 3WARE CONTROLLER (disk 0)
> Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)
>
> A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
>
> =====================================================================>
> With the permissive option:
>
> =====================================================================>
> # smartctl -T permissive -a -d 3ware,0 /dev/twe0
>
> smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> WARNING - NO DEVICE FOUND ON 3WARE CONTROLLER (disk 0)
> Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)
>
> === START OF INFORMATION SECTION ==> Device Model:     [No Information Found]
> Serial Number:    [No Information Found]
> Firmware Version: [No Information Found]
> Device is:        Not in smartctl database [for details use: -P showall]
> ATA Version is:   1
> ATA Standard is:  Exact ATA specification draft version not indicated
> Local Time is:    Fri Jun 10 19:44:33 2005 EDT
> SMART is only available in ATA Version 3 Revision 3 or greater.
> We will try to proceed in spite of this.
> SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
> A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
>
> =====================================================================>
> I'm probably doing something wrong but I have Read TFM.  Can someone give
> me a clue?
>
> Thanks!!
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: NEC IT Guy Games.  How far can you shotput
> a projector? How fast can you ride your desk chair down the office luge track?
> If you want to score the big prize, get to know the little guy.
> Play to win an NEC 61" plasma display: http://www.necitguy.com/?r 
> _______________________________________________
> Smartmontools-support mailing list
> Smartmontools-support@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
>


-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.  How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r 
_______________________________________________
Smartmontools-support mailing list
Smartmontools-support@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-support
[prev in list] [next in list] [prev in thread] [next in thread]