[prev in list] [next in list] [prev in thread] [next in thread]
List: smartmontools-support
Subject: Re: [smartmontools-support]initial operating temperature reports?
From: "Per Jessen" <per () computer ! org>
Date: 2004-12-30 17:56:18
Message-ID: 20041230175750.14B666B0D6 () mail ! local ! net
[Download RAW message or body]
On Thu, 30 Dec 2004 15:32:56 +0100, Per Jessen wrote:
>I have a system with 8 SCSI drives, all SMART capable :-) When I start
>smartd, I get a report of drive temperatures, but only 6 out of 8 drives?
>
>sda, sdb, sde, sdf, sdg, sdh - temp report.
>sdc, sdd - no temp report.
>sda, sdb, sdd - do not support SMART Selftest log.
I should add:
"smartctl -i" reports "Temperatur Warning Disabled or Not Supported" for all
8 drives.
/Per
--
regards,
Per Jessen, Zurich
http://www.spamchek.com - let your spam stop here!
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Smartmontools-support mailing list
Smartmontools-support@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-support
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic