[prev in list] [next in list] [prev in thread] [next in thread] 

List:       smartmontools-support
Subject:    Re: [smartmontools-support]bad sectors with freebsd
From:       Ciro Scognamiglio <moray () oltrelinux ! com>
Date:       2004-10-22 17:38:13
Message-ID: 20041022173813.GA3086 () oltrelinux ! com
[Download RAW message or body]

On Fri, Oct 22, 2004 at 11:38:06AM -0400
Eduard Martinescu <martines@rochester.rr.com> wrote:

> Can you also send me the output of the following:
> 
> atacontrol info 0
> 
> (I think I remember you saying this was for /dev/ad0 , if it is ad2 or
> ad3, then substitute a 1 for the 0 above)
> 
> That command should report a short one line message for each drive on
> channel 0, which should include the serial #.  
>

here you are:

# atacontrol info 0
Master:  ad0 <SAMSUNG SP0802N/TK100-24> ATA/ATAPI revision 7
Slave:       no device present

I will also check with a Linux distro asap.

C. 


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Smartmontools-support mailing list
Smartmontools-support@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-support
[prev in list] [next in list] [prev in thread] [next in thread]