[prev in list] [next in list] [prev in thread] [next in thread] 

List:       smartmontools-database
Subject:    [Smartmontools-database] HGST HUS726040AL5210
From:       Youfu Zhang <zhangyoufu () gmail ! com>
Date:       2017-07-16 9:21:16
Message-ID: CAEKhA2z6K2FYcXE9D_DVa5yK-rR_accoP0sCt_=LukbJ9K8rvw () mail ! gmail ! com
[Download RAW message or body]

Changeset 4327 introduces support for HGST Ultrastar 7K6000.
However my device doesn't match the regex in drivedb.

["smartctl-HGST-HUS726040AL5210.txt" (text/plain)]

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-83-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS726040AL5210
Revision:             A907
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca2443c4f4c
Serial number:        N8H256PZ
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sun Jul 16 17:15:07 2017 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     37 C
Drive Trip Temperature:        85 C

Manufactured in week 11 of year 2017
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  73
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 427618201501696

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0       1897        224.386           0
write:         0        0         0         0      40062        550.171           0
verify:        0        0         0         0       1968          0.000           0

Non-medium error count:        0

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -     795                 - [-   -    -]

Long (extended) Self Test duration: 34237 seconds [570.6 minutes]

Background scan results log
  Status: waiting until BMS interval timer expires
    Accumulated power on time, hours:minutes 795:22 [47722 minutes]
    Number of background scans performed: 7,  scan progress: 0.00%
    Number of background medium scans performed: 7

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: loss of dword synchronization
    reason: unknown
    negotiated logical link rate: phy enabled; 12 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca2443c4f4d
    attached SAS address = 0x5003048017fc203f
    attached phy identifier = 5
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca2443c4f4e
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database


[prev in list] [next in list] [prev in thread] [next in thread]