[prev in list] [next in list] [prev in thread] [next in thread]
List: smartmontools-database
Subject: [Smartmontools-database] Samsung 3.5" 200GB SSD info
From: "ben_myers () charter ! net" <ben_myers () charter ! net>
Date: 2013-12-16 2:30:50
Message-ID: 380-22013121162305099 () M2W105 ! mail2web ! com
[Download RAW message or body]
Attached ia info about a Samsung 200GB 3=2E5" SSD I have here=2E=2E=2E Ben=
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://link=2Email2web=2Ecom/mail2web
["SAMSUNG_MCCPE2HGGAXP-0VCC3_S0HTNEAZ501608_2013-12-15.txt" (text/plain)]
smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-xp-sp3] (sf-5.43-1)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MCCPE2HGGAXP-0VCC3
Serial Number: S0HTNEAZ501608
LU WWN Device Id: 5 002538 1500021a2
Firmware Version: VCC16C4Q
User Capacity: 200,049,647,616 bytes [200 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4c
Local Time is: Sun Dec 15 21:25:02 2013 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7260) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 121) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002a 200 200 000 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 6
14 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 256
15 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 186
16 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10496
17 Unknown_Attribute 0x0032 094 094 000 Old_age Always - 9947
173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 1
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 072 072 000 Old_age Always - 23
180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0
183 Runtime_Bad_Block 0x0033 100 100 040 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 081 080 000 Old_age Always - 24
195 Hardware_ECC_Recovered 0x002a 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Data_Address_Mark_Errs 0x0023 100 075 050 Pre-fail Always - 0
234 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 2442
240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic