[prev in list] [next in list] [prev in thread] [next in thread] 

List:       smartmontools-database
Subject:    [Smartmontools-database] Add a device to database? (SSDSA2M160G2GC,
From:       Walther Maldonado <walther.md () gmail ! com>
Date:       2010-02-16 15:52:54
Message-ID: 20100216165254.2706e82d () Xellex
[Download RAW message or body]

Since my drive was not found in the database, I followed the instructions on how to \
add it there. The device is connected to a SATA-2 bridge configured in AHCI mode.

Cheers,
~Walther



smartctl 5.39 2009-12-09 r2995 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     INTEL SSDSA2M160G2GC
Serial Number:    CVPO950204DU160AGN
Firmware Version: 2CV102HD
User Capacity:    160 041 885 696 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Tue Feb 16 16:41:03 2010 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (   1) seconds.
Offline data collection
capabilities: 			 (0x75) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   1) minutes.
Conveyance self-test routine
recommended polling time: 	 (   1) minutes.

SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  \
WHEN_FAILED RAW_VALUE  3 Spin_Up_Time            0x0020   100   100   000    Old_age  \
Offline      -       0  4 Start_Stop_Count        0x0030   100   100   000    Old_age \
Offline      -       0  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age \
Always       -       0  9 Power_On_Hours          0x0032   100   100   000    Old_age \
Always       -       334  12 Power_Cycle_Count       0x0032   100   100   000    \
Old_age   Always       -       89 192 Power-Off_Retract_Count 0x0032   100   100   \
000    Old_age   Always       -       15 225 Load_Cycle_Count        0x0030   200   \
200   000    Old_age   Offline      -       4281 226 Load-in_Time            0x0032   \
100   100   000    Old_age   Always       -       5614 227 Torq-amp_Count          \
0x0032   100   100   000    Old_age   Always       -       3 228 \
Power-off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       \
745086783 232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always    \
-       0 233 Media_Wearout_Indicator 0x0032   099   099   000    Old_age   Always    \
-       0 184 End-to-End_Error        0x0033   100   100   099    Pre-fail  Always    \
-       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  \
LBA_of_first_error # 1  Vendor offline      Completed without error       00%       \
334         - # 2  Vendor offline      Completed without error       00%       264    \
- # 3  Reserved offline    Completed without error       00%       153         -
# 4  Reserved offline    Completed without error       00%        59         -

Note: selective self-test log revision number (0) not 1 implies that no selective \
self-test has ever been run SMART Selective self-test log data structure revision \
                number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



------------------------------------------------------------------------------
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
http://p.sf.net/sfu/solaris-dev2dev

_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database


[prev in list] [next in list] [prev in thread] [next in thread]