[prev in list] [next in list] [prev in thread] [next in thread] 

List:       smartmontools-database
Subject:    [Smartmontools-database] Seagate ST3320620NS not in database
From:       Wolle <mail () wolle-hamburg ! de>
Date:       2007-09-03 6:29:44
Message-ID: 200709030829.44186.mail () wolle-hamburg ! de
[Download RAW message or body]

Seagate ST3320620NS is not in smartctl database (version 5.37)

["Seagate-ST3320620NS.txt" (text/plain)]

smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST3320620NS
Serial Number:    5QF3ZHKQ
Firmware Version: 3.AEG
User Capacity:    320,072,933,376 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Sep  3 08:24:37 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 107) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  \
WHEN_FAILED RAW_VALUE  1 Raw_Read_Error_Rate     0x000f   117   095   006    Pre-fail \
Always       -       136583482  3 Spin_Up_Time            0x0003   096   096   000    \
Pre-fail  Always       -       0  4 Start_Stop_Count        0x0032   100   100   020  \
Old_age   Always       -       14  5 Reallocated_Sector_Ct   0x0033   100   100   036 \
Pre-fail  Always       -       0  7 Seek_Error_Rate         0x000f   069   060   030  \
Pre-fail  Always       -       10351637  9 Power_On_Hours          0x0032   100   100 \
000    Old_age   Always       -       264  10 Spin_Retry_Count        0x0013   100   \
100   097    Pre-fail  Always       -       0  12 Power_Cycle_Count       0x0032   \
100   100   020    Old_age   Always       -       41 187 Unknown_Attribute       \
0x0032   100   100   000    Old_age   Always       -       0 189 Unknown_Attribute    \
0x003a   100   100   000    Old_age   Always       -       0 190 Temperature_Celsius  \
0x0022   048   039   045    Old_age   Always   In_the_past 11094793125940 194 \
Temperature_Celsius     0x0022   052   061   000    Old_age   Always       -       52 \
(Lifetime Min/Max 0/29) 195 Hardware_ECC_Recovered  0x001a   071   054   000    \
Old_age   Always       -       223404218 197 Current_Pending_Sector  0x0012   100   \
100   000    Old_age   Always       -       0 198 Offline_Uncorrectable   0x0010   \
100   100   000    Old_age   Offline      -       0 199 UDMA_CRC_Error_Count    \
0x003e   200   200   000    Old_age   Always       -       0 200 \
Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0 \
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -      \
0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  \
LBA_of_first_error # 1  Short offline       Completed without error       00%       \
264         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database


[prev in list] [next in list] [prev in thread] [next in thread]