[prev in list] [next in list] [prev in thread] [next in thread]
List: smartmontools-database
Subject: [Smartmontools-database]TOSHIBA MK6025GAS
From: Karsten Scholz <k.scholz () interwall ! net>
Date: 2006-04-28 9:35:32
Message-ID: 4451E1E4.5010804 () interwall ! net
[Download RAW message or body]
[Attachment #2 (multipart/mixed)]
--
---------------------------------------------------------
Karsten Scholz
- Systemadministration -
Interwall GmbH
Contrescarpe 1
28203 Bremen
Fon. +49 - 421 - 20696-0
Fax +49 - 421 - 20696-99
k.scholz@interwall.net
www.interwall.net
["TOSHIBA_MK6025GAS.txt" (text/plain)]
smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK6025GAS
Serial Number: 64I41296S
Firmware Version: KA200A
User Capacity: 60,011,642,880 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Apr 28 10:47:39 2006 Westeuropäische Sommerzeit
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 295) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 59) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED \
WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail \
Always - 0 2 Throughput_Performance 0x0005 100 100 050 \
Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 \
Pre-fail Always - 1080 4 Start_Stop_Count 0x0032 100 100 \
000 Old_age Always - 28116 5 Reallocated_Sector_Ct 0x0033 100 \
100 050 Pre-fail Always - 161 7 Seek_Error_Rate 0x000b \
100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 \
100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 \
082 082 000 Old_age Always - 7492 10 Spin_Retry_Count \
0x0033 253 100 030 Pre-fail Always - 0 12 Power_Cycle_Count \
0x0032 100 100 000 Old_age Always - 2075 192 \
Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - \
248 193 Load_Cycle_Count 0x0032 060 060 000 Old_age Always - \
405557 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always \
- 43 (Lifetime Min/Max 13/55) 196 Reallocated_Event_Count 0x0032 100 100 \
000 Old_age Always - 77 197 Current_Pending_Sector 0x0032 100 \
100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 \
100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count \
0x0032 200 200 000 Old_age Always - 0 220 Disk_Shift \
0x0002 100 100 000 Old_age Always - 83 222 Loaded_Hours \
0x0032 087 087 000 Old_age Always - 5272 223 Load_Retry_Count \
0x0032 100 100 000 Old_age Always - 0 224 Load_Friction \
0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time \
0x0026 100 100 000 Old_age Always - 222 240 Head_Flying_Hours \
0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 occurred at disk power-on lifetime: 7450 hours (310 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 45 24 6f e0 Error: UNC 2 sectors at LBA = 0x006f2445 = 7283781
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 26 21 24 6f e0 00 00:00:49.428 READ DMA
c8 ff 1a 07 24 6f e0 00 00:00:49.314 READ DMA
c8 ff 20 e7 23 6f e0 00 00:00:49.197 READ DMA
c8 ff 05 e2 23 6f e0 00 00:00:49.197 READ DMA
c8 ff 3b a7 23 6f e0 00 00:00:49.196 READ DMA
Error 2 occurred at disk power-on lifetime: 7387 hours (307 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 fe ff 6d e0 Error: UNC 6 sectors at LBA = 0x006dfffe = 7208958
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 15 ef ff 6d e0 00 00:00:19.639 READ DMA
c8 ff 18 d7 ff 6d e0 00 00:00:19.637 READ DMA
c8 ff 12 c5 ff 6d e0 00 00:00:19.637 READ DMA
c8 ff 2e 97 ff 6d e0 00 00:00:19.636 READ DMA
c8 ff 11 86 ff 6d e0 00 00:00:19.636 READ DMA
Error 1 occurred at disk power-on lifetime: 7387 hours (307 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 fe ff 6d e0 Error: UNC 6 sectors at LBA = 0x006dfffe = 7208958
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 15 ef ff 6d e0 00 00:00:21.526 READ DMA
c8 ff 18 d7 ff 6d e0 00 00:00:21.525 READ DMA
c8 ff 12 c5 ff 6d e0 00 00:00:21.524 READ DMA
c8 ff 2e 97 ff 6d e0 00 00:00:21.524 READ DMA
c8 ff 11 86 ff 6d e0 00 00:00:21.524 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) \
LBA_of_first_error # 1 Short offline Completed without error 00% \
7492 - # 2 Short offline Completed without error 00% 7474 \
-
Device does not support Selective Self Tests/Logging
["smime.p7s" (application/x-pkcs7-signature)]
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic