[prev in list] [next in list] [prev in thread] [next in thread]
List: smartmontools-database
Subject: [Smartmontools-database]Maxtor 6H500F0
From: "John Milton" <john.milton () usa ! net>
Date: 2006-04-26 6:10:09
Message-ID: 001a01c668f8$1243a900$1814a8c0 () VIA
[Download RAW message or body]
serial xxx'ed out
["6H500F0.txt" (text/plain)]
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 6H500F0
Serial Number: H80PLB7H
Firmware Version: HA431DD0
User Capacity: 500,106,780,160 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Wed Apr 26 01:02:42 2006 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (9423) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 213) minutes.
SMART Attributes Data Structure revision number: 32
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 252 252 063 Pre-fail Always - 3978
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 13
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 251 249 187 Pre-fail Always - 40284
9 Power_On_Hours 0x0032 253 253 000 Old_age Always - 163
10 Spin_Retry_Count 0x002b 252 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 17
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Unknown_Attribute 0x0022 065 056 000 Old_age Always - 639041571
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 038 253 000 Old_age Always - 35
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 2258
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 1
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 252 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 252 252 000 Old_age Always - 0
210 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
211 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
212 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 28 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ee 57 38 ea
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ee 57 38 ea 00 00:11:33.891 SET MAX ADDRESS EXT
27 00 00 ee 57 38 e0 00 00:11:33.890 READ NATIVE MAX ADDRESS EXT
37 00 00 ee 57 38 ea 00 00:11:33.758 SET MAX ADDRESS EXT
27 00 01 ee 57 38 e0 00 00:11:33.757 READ NATIVE MAX ADDRESS EXT
37 00 01 ee 57 38 ea 00 00:11:31.654 SET MAX ADDRESS EXT
Error 27 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ee 57 38 ea
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ee 57 38 ea 00 00:11:31.654 SET MAX ADDRESS EXT
27 00 00 ee 57 38 e0 00 00:11:31.653 READ NATIVE MAX ADDRESS EXT
37 00 00 ee 57 38 ea 00 00:11:31.521 SET MAX ADDRESS EXT
27 00 00 2f 60 38 e0 00 00:11:31.519 READ NATIVE MAX ADDRESS EXT
29 00 01 2f 60 38 e0 00 00:11:31.381 READ MULTIPLE EXT
Error 26 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ee 57 38 ea
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ee 57 38 ea 00 00:08:19.449 SET MAX ADDRESS EXT
27 00 00 ee 57 38 e0 00 00:08:19.448 READ NATIVE MAX ADDRESS EXT
37 00 00 ee 57 38 ea 00 00:08:19.316 SET MAX ADDRESS EXT
27 00 01 ee 57 38 e0 00 00:08:19.315 READ NATIVE MAX ADDRESS EXT
37 00 01 ee 57 38 ea 00 00:08:17.213 SET MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 144 -
# 2 Short offline Completed without error 00% 123 -
# 3 Short offline Completed without error 00% 99 -
# 4 Short offline Completed without error 00% 75 -
# 5 Extended offline Completed without error 00% 56 -
# 6 Short offline Completed without error 00% 51 -
# 7 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic