[prev in list] [next in list] [prev in thread] [next in thread]
List: smartmontools-database
Subject: [Smartmontools-database]Fujitsu MPG3409AT E and Quantum FIREBALLP LM15
From: Sergei Klink <sklink () yandex ! ru>
Date: 2004-05-10 22:08:09
Message-ID: 200405101608.09562.sklink () yandex ! ru
[Download RAW message or body]
Another try to get these ones through...
["smartctl_output" (text/plain)]
smartctl version 5.31 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MPG3409AT E
Serial Number: VH06T190RDAN
Firmware Version: 82C5
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Thu May 6 22:45:49 2004 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 50) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 098 032 Pre-fail Always - 246399
2 Throughput_Performance 0x0005 080 080 020 Pre-fail Offline - 240
3 Spin_Up_Time 0x0007 090 084 025 Pre-fail Always - 3
4 Start_Stop_Count 0x0012 100 100 016 Old_age Always - 107
5 Reallocated_Sector_Ct 0x0033 042 042 024 Pre-fail Always - 558
7 Seek_Error_Rate 0x000b 100 100 020 Pre-fail Always - 2243
8 Seek_Time_Performance 0x0005 077 077 019 Pre-fail Offline - 36
9 Power_On_Hours 0x0012 010 010 020 Old_age Always FAILING_NOW 48809798
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 093 093 020 Old_age Always - 1063
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 42
196 Reallocated_Event_Count 0x0033 042 042 024 Pre-fail Always - 104
197 Current_Pending_Sector 0x0010 100 100 020 Old_age Offline - 0
198 Offline_Uncorrectable 0x0010 100 100 020 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 197 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000b 100 058 020 Pre-fail Always - 164
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
ATA Error Count: 10 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 10 occurred at disk power-on lifetime: 7067 hours (294 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 20 1f bf f1 Error: UNC 1 sectors at LBA = 0x01bf1f20 = 29302560
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 20 1f bf f1 00 00:01:13.800 READ DMA
Error 9 occurred at disk power-on lifetime: 2806 hours (116 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 68 a6 64 f2 Error: UNC 7 sectors at LBA = 0x0264a668 = 40150632
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 67 a6 64 f2 00 00:00:58.900 READ DMA
Error 8 occurred at disk power-on lifetime: 2804 hours (116 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 00 00 00 f0 Error: UNC 1 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 00 00 00 f0 00 00:00:32.700 READ DMA
Error 7 occurred at disk power-on lifetime: 2783 hours (115 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 0a a5 64 f2 Error: UNC 5 sectors at LBA = 0x0264a50a = 40150282
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 08 07 a5 64 f2 00 00:02:30.500 READ DMA
Error 6 occurred at disk power-on lifetime: 2783 hours (115 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 58 a7 64 f2 Error: UNC 7 sectors at LBA = 0x0264a758 = 40150872
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 57 a7 64 f2 00 00:01:16.200 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13554 -
# 2 Short offline Completed without error 00% 13553 -
Device does not support Selective Self Tests/Logging
["smartctl_output_hda" (text/plain)]
smartctl version 5.31 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: QUANTUM FIREBALLP LM15
Serial Number: 883015968988
Firmware Version: A35.0700
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Thu May 6 22:54:30 2004 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 46) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 13) minutes.
SMART Attributes Data Structure revision number: 11
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 065 064 020 Pre-fail Always - 4499
4 Start_Stop_Count 0x0032 095 095 008 Old_age Always - 3283
5 Reallocated_Sector_Ct 0x0033 100 100 020 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0
9 Power_On_Hours 0x0012 084 084 001 Old_age Always - 10764
10 Spin_Retry_Count 0x0026 100 100 020 Old_age Always - 0
11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 008 Old_age Always - 2966
13 Read_Soft_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0
199 UDMA_CRC_Error_Count 0x001a 200 200 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0010 100 100 020 Old_age Offline - 0
197 Current_Pending_Sector 0x0032 100 100 020 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 10760 -
Device does not support Selective Self Tests/Logging
-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to
deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic