[prev in list] [next in list] [prev in thread] [next in thread] 

List:       sip-implementors
Subject:    Re: [Sip-implementors] How to know SIP200 or RTP message is on the port?
From:       Neelakantan Balasubramanian <Bala_Neelakantan () Quintum ! com>
Date:       2008-12-23 16:50:21
Message-ID: 87278613D061664392F2161B99567B870EF2946C7B () fmt-qex01 ! quintum ! com
[Download RAW message or body]

Are you looking to see the real time events like SIP messages, RTP, etc, you can use network protocol sniffers/analyzers like tcpdump, Wireshark, etc.  The ports for SIP messages are typically 5060 or 5061.  The RTP port ranges are dynamic.  You can use your favorite packet sniffers to see such things.

Thanks,
Neel.

> -----Original Message-----
> From: sip-implementors-bounces@lists.cs.columbia.edu [mailto:sip-
> implementors-bounces@lists.cs.columbia.edu] On Behalf Of Vikas Sharma
> Sent: Tuesday, December 23, 2008 6:01 AM
> To: sip-implementors@lists.cs.columbia.edu
> Subject: [Sip-implementors] How to know SIP200 or RTP message is on the
> port?
>
> hi all
> I have a setup. Everything is fine. A gateway is there.
> Calls routes through that gateway using a particular port.
>
> How can i know the status of that port
> i.e which message is going on
> SIP 200 has gone or not
> is RTP messages are going on
> ?
>
> How do know such things.
> --
> vikas sharma
> _______________________________________________
> Sip-implementors mailing list
> Sip-implementors@lists.cs.columbia.edu
> https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors


[prev in list] [next in list] [prev in thread] [next in thread]