[prev in list] [next in list] [prev in thread] [next in thread]
List: sip-implementors
Subject: Re: [Sip-implementors] [Sip] SIP Outbound : How to identify edge-proxy ?
From: "Hisham Khartabil" <hisham.khartabil () gmail ! com>
Date: 2008-02-29 5:33:49
Message-ID: 66cd252f0802282133l5978fa0an485a2690ee5d7971 () mail ! gmail ! com
[Download RAW message or body]
How are you definig edge proxy? Edge proxy is the first hop from the UA.
Hisham
On 14/02/2008, Karthikeyan Gopal , TLS-Chennai <g_karthikeyan@hcl.in> wrote=
:
>
> Hi All,
>
> How to identify edge-proxy in this topology?
>
>
>
> UA =96 P1 =96 P2 =96 P3 =96 REGISTRAR
>
>
>
> Here in this case P1 and P3 are Edge proxy's as per Path header RFC 3327.
>
>
>
>
>
> Edge proxy P1 can be identified based on VIA.
>
>
>
> Then how to edge proxy identify P3?
>
>
>
> Thanks & Regards,
>
> Karthikeyan.G
>
>
> DISCLAIMER:
>
> -------------------------------------------------------------------------=
----------------------------------------------
>
> The contents of this e-mail and any attachment(s) are confidential and
> intended for the named recipient(s) only.
> It shall not attach any liability on the originator or HCL or its
> affiliates. Any views or opinions presented in
> this email are solely those of the author and may not necessarily reflect
> the opinions of HCL or its affiliates.
> Any form of reproduction, dissemination, copying, disclosure,
> modification, distribution and / or publication of
> this message without the prior written consent of the author of this
> e-mail is strictly prohibited. If you have
> received this email in error please delete it and notify the sender
> immediately. Before opening any mail and
> attachments please check them for viruses and defect.
>
>
> -------------------------------------------------------------------------=
----------------------------------------------
>
> _______________________________________________
> Sip mailing list http://www.ietf.org/mailman/listinfo/sip
> This list is for NEW development of the core SIP Protocol
> Use sip-implementors@cs.columbia.edu for questions on current sip
> Use sipping@ietf.org for new developments on the application of sip
>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic