[prev in list] [next in list] [prev in thread] [next in thread]
List: sip-implementors
Subject: [Sip-implementors] Dialing a Vonage or IPTel.org URI from the FWD Network
From: "F.C. Wood" <c () wood ! org>
Date: 2003-02-25 21:41:01
Message-ID: FEBB3A775AB2FF48A096BC3302C821D303C7CD () dc1 ! wood ! okc
[Download RAW message or body]
Any number or SIP address can be dialed on a Cisco 7960 SIP phone. Here's \
instructions for a 7960 running SIP firmware version 3.2 with multiple lines set up \
and iptel set up on line 3:
1. Begin by pressing the "Line" button corresponding to the line registered with the \
Proxy Address "iptel.org" (as seen in Settings -> 4. SIP Configuration -> Line 3 \
Settings -> 5. Proxy Address)
2. Note that the line icon displayed is shaped like an old-fashioned telephone.
3. Press the softkey corresponding to "URL". Note that as soon as "URL" is depressed, \
the phone line icon no longer appears as a an old-fashioned telephone but instead \
appears similar to an "@" symbol with the old-fashioned telephone receiver on the \
top.
To dial the colon ":", [after depressing the "URL" softkey] simply press the "1" key \
five (5) times [You'll see as soon as you press the "1" key the first time, the other \
characters available from that "number button" will appear upon the LCD screen. The \
"@" symbol is displayed [after depressing the "URL" softkey] the first time the \
"0(OPER)" key is depressed.
4. Input the dialed party's address using the same procedure used to spell with the \
7960 phone's keypad.
5. When all characters in the address character string (e.g. fc@iptel.org) have been \
input, press the "Dial" softkey to send the character string.
All the best,
F C Wood
fc@wood.org
sip:fc@iptel.org
FWD #17850
-----Original Message-----
From: Ted Hughes [mailto:Hughes@MOMENT.NET]
Sent: Tue 2/25/2003 2:52 PM
To: FWD@LISTSERV.PULVER.COM
Cc:
Subject: Re: [FWD] Dialing a Vonage URI from the FWD Network
So how would you dial a FWD number in this format?
Also, is it possible to dial a ':'?
----- Original Message -----
From: Lame Duck <mailto:lameduck1975@YAHOO.COM>
To: FWD@LISTSERV.PULVER.COM
Sent: Tuesday, February 25, 2003 3:06 PM
Subject: Re: [FWD] Dialing a Vonage URI from the FWD Network
Yes, that can be done.
'@' is dialed as "**", and '.' and ':' are dialed as a '*'.
Thus to dial Jeff's Vonage number - 16313501554@sip.vonage.net - try dialing \
following from your ATA.
16313501554**12*144*47*38 (Here 12.144.47.38 is Ip address of SIP.Vonage.net)
Thanks
Rohit
Rex Irby - The Computer Guy <Rex.irby@ATTBI.COM> wrote:
Has anyone figured out how to use the Cisco ATA's to dial a
"sip:{Vonage_Phone Number 10 digits}@sip.vonage.net" or
any other URL listed sip number? Sip:{name}@{Sip Server DNS name.com} -
not the technical RFC format obviously.
Not talking about a numeric number only but anything in SIP URL format that
cant be dialed on a telephone dial pad.
Rex Irby - The Computer Guy
More Bytes for your Bit
cell 630.776.6140 rex.irby@attbi.com
IP Phone 1.630.592.9605
_____
Do you Yahoo!?
Yahoo! Tax Center <http://rd.yahoo.com/finance/mailtagline/*http://taxes.yahoo.com/> \
- forms, calculators, tips, and more
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic