[prev in list] [next in list] [prev in thread] [next in thread] 

List:       shrew-vpn-help
Subject:    [Vpn-help] Windows client 2.1.4, Arkoon & autoconfiguration issues
From:       mgrooms () shrew ! net (Matthew Grooms)
Date:       2009-09-29 4:14:07
Message-ID: 4AC1898F.2050605 () shrew ! net
[Download RAW message or body]

Eric Masson wrote:
> "Philippe ROSE" <philippe.rose at filopat.net> writes:
> 
> Hi,
> 
> The box I'm trying to connect to is :
> Firewall Arkoon A51
> Version 4.1EMB/3
> 
>> For arkoon with mutual RSA authentication you have to put
>> configuration to use an existing adapter and you have to add network
>> addresses to ressources in the policy parameters (in my following
>> config, 192.168.3.0/24). Here's the relevant parameters of my .vpn
>> export file (add your IP adresses and credentials):
> 
> I've tested with a configuration based on your settings, but no luck,
> phase 2 fails.
> 

Eric,

Your getting a NO-PROPOSAL chosen message during phase1 negotiations. 
That typically means you need to match the parameters in the phase1 to 
the settings on your gateway. You also need to make sure your auth type 
and ID settings match.

-Matthew


[prev in list] [next in list] [prev in thread] [next in thread]