[prev in list] [next in list] [prev in thread] [next in thread] 

List:       serusers
Subject:    [Serusers] Changes in serctl command and location table in 0.8.13
From:       jan () iptel ! org (Jan Janak)
Date:       2004-01-31 2:22:45
Message-ID: 20040131012240.GW1042 () localhost ! localdomain
[Download RAW message or body]

Set modparam("usrloc", "use_domain", "1"). 0.8.13 is the development
branch and that's work in progress so don't expect things always work as
expected. I do not recomment using the unstable branch.

 Jan.

On 30-01 17:42, Andres wrote:
> Hi,
> 
> In 0.8.13 the location table stores values as "username@domain" in the 
> username column, but in previous versions it was just "username".  Is 
> there is a config parameter to switch between one format and the other?
> 
> And the "serctl ul show <username>" never finds anyone, even though the 
> "serctl ul show" command clearly shows them there.  For example:
> 
> serctl ul show 1040@sip.telesip.net
> 404 Username 1040 in table location not found
> 
> and....
> serctl ul show....
> 
> ...Record(0x422be248)...
> domain: 'location'
> aor   : '1040@sip.telesip.net'
> ~~~Contact(0x422be2b8)~~~
> domain : 'location'
> aor    : '1040@sip.telesip.net'
> Contact: 'sip:1040@200.118.1.1:5060;user=phone;transport=udp'
> Expires: 594
> q      :       0.00
> Call-ID: '1436722947@200.118.1.1'
> CSeq   : 63
> replic : 0
> State  : CS_DIRTY
> Flags  : 0
> next   : (nil)
> prev   : (nil)
> ~~~/Contact~~~~
> 
> Is there anything obvious I am missing here?
> 
> Thanks,
> 
> -- 
> Andres
> Network Admin
> http://www.telesip.net
> 
> 
> _______________________________________________
> Serusers mailing list
> Serusers@iptel.org
> http://mail.iptel.org/mailman/listinfo/serusers

[prev in list] [next in list] [prev in thread] [next in thread]