[prev in list] [next in list] [prev in thread] [next in thread] 

List:       scst-devel
Subject:    Re: [Scst-devel] Error while configuring SCST target
From:       Ram Ankireddypalle via Scst-devel <scst-devel () lists ! sourceforge ! net>
Date:       2020-01-26 0:41:23
Message-ID: F3E587E4-9D1B-4051-824F-23F6C4CAD2C1 () commvault ! com
[Download RAW message or body]

Thanks for checking. My goal is to use an existing FC port.

Thanks and Regards,
Ram 

Sent from my iPhone

> On Jan 25, 2020, at 6:44 PM, Bart Van Assche <bvanassche@acm.org> wrote:
> 
> On 2020-01-24 23:53, Ram Ankireddypalle wrote:
>> It was triggered by scstadmin.
> 
> Hi Ram,
> 
> Is your goal to use an existing FC port or did you rather want to
> configure NPIV? If your goal is to configure an existing FC port this
> error message means that the port names in scst.conf are wrong. The
> target port names can be retrieved as follows:
> 
> # modprobe qla2x00tgt
> # (cd /sys/kernel/scst_tgt/targets/qla2x00t && ls -d [0-9a-fA-F]*)
> 21:00:00:24:ff:91:c4:14  21:00:00:24:ff:91:c4:15  mgmt  trace_level  version
> 
> If your goal is rather to configure NPIV then that error message means
> that several essential configuration parameters for an NPIV port are
> missing from scst.conf.
> 
> Bart.
> 

_______________________________________________
Scst-devel mailing list
https://lists.sourceforge.net/lists/listinfo/scst-devel

[prev in list] [next in list] [prev in thread] [next in thread]