[prev in list] [next in list] [prev in thread] [next in thread]
List: scilab-users
Subject: Re: [Scilab-users] xcos summation block doesn't work properly
From: Claus Futtrup <cfuttrup () gmail ! com>
Date: 2019-02-23 16:57:14
Message-ID: 7bafb15d-e20f-7973-3d5d-21d8b2c83837 () gmail ! com
[Download RAW message or body]
Hi Farimani
It works here at my end. I just opened up XCOS on a Scilab 6.0.1 system
and added the summation module. I can specify the modules and I can
decide the order of appearance (++ -- or +-+-) etc.
Which OS and which version of Scilab are you using?
Best regards,
Claus
On 19.02.2019 16:56, farimani wrote:
> I'm trying to use the summation block but it does not work properly:
>
> <http://mailinglists.scilab.org/file/t497909/2019-02-19_16-53-07.gif>
>
> no matter if the port is -1 or +1 it just adds +1s!
>
>
>
> --
> Sent from: http://mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html
> _______________________________________________
> users mailing list
> users@lists.scilab.org
> http://lists.scilab.org/mailman/listinfo/users
>
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
users mailing list
users@lists.scilab.org
http://lists.scilab.org/mailman/listinfo/users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic