[prev in list] [next in list] [prev in thread] [next in thread]
List: redhat-linux-cluster
Subject: Re: [Linux-cluster] SAN + multipathd + GFS : SCSI error
From: tameikareed <tameikareed () satx ! rr ! com>
Date: 2007-08-15 0:50:02
Message-ID: 46C24DBA.6000404 () satx ! rr ! com
[Download RAW message or body]
Have you tried moving the data to another lun and deleting the lun with
errors and recreating that lun? I know that involves downtime unless you
have some type of failover implemented.
berthiaume_wayne@emc.com wrote:
> These are DID_BUS_BUSY errors being reported by the QLogic driver. I
> would check your SAN for congestion, increase the cache in the EVA, or
> change the queue depth in your qla2xxx driver.
>
> Regards,
> Wayne.
>
> -----Original Message-----
> From: linux-cluster-bounces@redhat.com
> [mailto:linux-cluster-bounces@redhat.com] On Behalf Of FM
> Sent: Friday, August 10, 2007 9:58 AM
> To: Redhat Cluster
> Subject: [Linux-cluster] SAN + multipathd + GFS : SCSI error
>
> Hello,
> All servers are RHEL 4.5
> SAN is HP EVA 4000
> we are using linux qla modules and multipathd
> cluster server have only one FC Card
>
>
> In the dmesg of servers connected to GFS we have a lot of :
> SCSI error : <0 0 1 1> return code = 0x20000
> end_request: I/O error, dev sdd, sector 37807111
>
> The cluster seems to work fine but I'd like to know if we can avoid this
> error.
>
> here is a multipathd -ll output :
>
> [root@como ~]# multipath -ll
> mpath1 (3600508b4001051e40000900000310000)
> [size=500 GB][features="1 queue_if_no_path"][hwhandler="0"]
> \_ round-robin 0 [prio=50][active]
> \_ 0:0:0:1 sda 8:0 [active][ready]
> \_ round-robin 0 [prio=10][enabled]
> \_ 0:0:1:1 sdd 8:48 [active][ready]
>
> mpath3 (3600508b4001051e400009000009e0000)
> [size=150 GB][features="1 queue_if_no_path"][hwhandler="0"]
> \_ round-robin 0 [prio=50][active]
> \_ 0:0:1:2 sde 8:64 [active][ready]
> \_ round-robin 0 [prio=10][enabled]
> \_ 0:0:0:2 sdb 8:16 [active][ready]
>
>
>
> and the device in the multipath.conf
>
> devices {
> device {
> vendor "HP "
> product "HSV200 "
> path_grouping_policy group_by_prio
> getuid_callout "/sbin/scsi_id -g -u -s
> /block/%n"
> path_checker tur
> path_selector "round-robin 0"
> prio_callout "/sbin/mpath_prio_alua %d"
> failback immediate
> no_path_retry 60
> }
> }
>
> --
> Linux-cluster mailing list
> Linux-cluster@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
>
> --
> Linux-cluster mailing list
> Linux-cluster@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
>
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic