[prev in list] [next in list] [prev in thread] [next in thread]
List: racf-l
Subject: Re: Error IRRV015I)
From: Prakash Lalaram <00000bb0c029af99-dmarc-request () LISTSERV ! UGA ! EDU>
Date: 2020-05-17 12:29:03
Message-ID: 726beea2c7b5460c85d176b49c384319 () riyadbank ! com
[Download RAW message or body]
Classification: Public
Good Day
Thank you it worked now. Sometimes we need to look at the basics before anything \
else. My ID was looking for the access as I was running the command as well. I added \
my ID to the access list for the profile DIRECT.* under class RRSFDATA
Ran a RACLIST Refresh .
And all is ok now.
=======================================================================
/* CKRCMD file CKR1CMD complex DEV1 generated 17 May 2020 15:24 */
/* Commands generated by REMOVE REDUNDANT_PERMIT */
Prakash Lalaram
Senior Manager
BT Specialist
Tel.:+966-11-204-6600 Ext.: 2235 | Mobile.:+966-56-246-8228
prakash.lalaram@riyadbank.com
For clean environment, please avoid unnecessary printing.
-----Original Message-----
From: RACF Discussion List <RACF-L@LISTSERV.UGA.EDU> On Behalf Of Lou Losee
Sent: Sunday, May 17, 2020 3:11 PM
To: RACF-L@LISTSERV.UGA.EDU
Subject: Re: Error IRRV015I)
If the RRSFDATA class is RACLISTed, did you issue a SETR RACLIST(RRSFDATA) REFRESH??
If it is not RACLISTED did you issue a SETR GENERIC(RRSFDATA) REFRESH?
Lou
--
Artificial Intelligence is no match for Natural Stupidity
- Unknown
On Sun, May 17, 2020 at 7:05 AM Prakash Lalaram < \
00000bb0c029af99-dmarc-request@listserv.uga.edu> wrote:
> Classification: Public
>
> Good Day
>
> Hope all is well and Keeping Safe
>
>
> Got this error below . ( IRRV015I) when I looked up the error it
> advised that I should create a profile "DIRECT" under the class
> RRSFDATA. I did this. Defined a profile called DIRECT.*
>
> Ran a RACKLIST Refresh, but I am still getting the error.
>
> Any assistance will be appreciated
>
>
> IRRV015I You are not authorized to direct commands to the DEV1 node
> with the
> AT() keyword.
>
>
>
> Problem determination
>
> The ability to direct commands with the AT keyword is protected by way
> of RACF profiles in the RRSFDATA class. Ensure that the RRSFDATA class
> is active, profiles are up to date (that is, RACLIST REFRESHed if you
> have the class RACLISTed), and that you have the proper authority
> granted to the profile covering the "DIRECT.nodename" entity. For more
> details, see z/OS Security Server RACF Security Administrator's Guide<
> https://www.ibm.com/support/knowledgecenter/SSLTBW_2.4.0/com.ibm.zos.v
> 2r4.icha700/abstract.htm?view=kc
> > .
>
>
>
> [http://media.riyadbank.com/images/emaillogo.png]<
> https://www.riyadbank.com/>
>
> Prakash Lalaram
> Senior Manager
> BT Specialist
> Tel.:+966-11-204-6600 Ext.: 2235 | Mobile.:+966-56-246-8228
> prakash.lalaram@riyadbank.com<mailto:prakash.lalaram@riyadbank.com>
> For clean environment, please avoid unnecessary printing.
>
>
>
> This email is classified by Riyad Bank Classification Tool.
> To view Riyad Bank eMail disclaimer, please click here:
> http://media.riyadbank.com/images/Disclaimer.html
>
This email is classified by Riyad Bank Classification Tool.
To view Riyad Bank eMail disclaimer, please click here: \
http://media.riyadbank.com/images/Disclaimer.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic