[prev in list] [next in list] [prev in thread] [next in thread]
List: qubes-devel
Subject: [qubes-devel] CoreBoot + Qubes on thinkpad x230
From: Trammell Hudson <hudson () trmm ! net>
Date: 2016-07-24 17:47:53
Message-ID: 20160724174753.GY16348 () chishio ! swcp ! com
[Download RAW message or body]
I reported on twitter that my Thinkpad x230 with a recent build of
coreboot (from git head) appears to support DMAR and the IOMMU is
configured with Qubes 3.1. Unlike Lovecroft's report on issue 1594,
my system boots reliably, although I posted the to the coreboot list
regarding a video glitch during bootup:
https://www.coreboot.org/pipermail/coreboot/2016-July/081726.html
Here are the hcl report and dmesg output.
Qubes release 3.1 (R3.1)
Brand: LENOVO
Model: 2325AP7
BIOS: CBET4000 4.4-905-g03a2005
Xen: 4.6.0
Kernel: 4.1.13-9
RAM: 4020 Mb
CPU:
Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz
Chipset:
Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
VGA:
Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) \
(prog-if 00 [VGA controller])
Net:
Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
SCSI:
Patriot Blast Rev: 12.2
HVM: Active
I/O MMU: Active
TPM: Device present
Qubes HCL Files are copied to: 'dom0'
Qubes-HCL-LENOVO-2325AP7-20160724-132532.yml - HCL Info
And the dmesg:
[ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.13-9.pvops.qubes.x86_64 (user@release) (gcc version \
4.8.3 20140911 (Red Hat 4.8.3-7) (GCC) ) #1 SMP Thu Feb 11 15:46:02 UTC 2016 [ \
0.000000] Command line: placeholder root=/dev/mapper/qubes_dom0-root ro \
i915.preliminary_hw_support=1 rd.lvm.lv=qubes_dom0/root \
rd.luks.uuid=luks-0f662ac6-2939-48fe-bc95-f5a7e3d6fefb \
vconsole.font=latarcyrheb-sun16 rd.lvm.lv=qubes_dom0/swap rhgb quiet [ 0.000000] \
Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] Xen: [mem 0x000000000009fc00-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000bfe8bfff] usable
[ 0.000000] Xen: [mem 0x00000000bfe8c000-0x00000000c29fffff] reserved
[ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000013b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2325AP7/2325AP7, BIOS CBET4000 4.4-905-g03a2005 07/22/2016
[ 0.000000] Hypervisor detected: Xen
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13b600 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0xbfe8c max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfc00000-0xbfdfffff]
[ 0.000000] [mem 0xbfc00000-0xbfdfffff] page 4k
[ 0.000000] BRK [0x02020000, 0x02020fff] PGTABLE
[ 0.000000] BRK [0x02021000, 0x02021fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xa0000000-0xbfbfffff]
[ 0.000000] [mem 0xa0000000-0xbfbfffff] page 4k
[ 0.000000] BRK [0x02022000, 0x02022fff] PGTABLE
[ 0.000000] BRK [0x02023000, 0x02023fff] PGTABLE
[ 0.000000] BRK [0x02024000, 0x02024fff] PGTABLE
[ 0.000000] BRK [0x02025000, 0x02025fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x80000000-0x9fffffff]
[ 0.000000] [mem 0x80000000-0x9fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[ 0.000000] [mem 0x00100000-0x7fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfe00000-0xbfe8bfff]
[ 0.000000] [mem 0xbfe00000-0xbfe8bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13b5fffff]
[ 0.000000] [mem 0x100000000-0x13b5fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x04000000-0x06519fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0DB0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFEB20E0 00005C (v01 CORE COREBOOT 00000000 \
CORE 00000000) [ 0.000000] ACPI: FACP 0x00000000BFEB58B0 0000F4 (v04 CORE \
COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: DSDT 0x00000000BFEB2280 003627 \
(v02 COREv4 COREBOOT 20110725 INTL 20160318) [ 0.000000] ACPI: FACS \
0x00000000BFEB2240 000040 [ 0.000000] ACPI: FACS 0x00000000BFEB2240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFEB59B0 0016C9 (v02 CORE COREBOOT 0000002A \
CORE 0000002A) [ 0.000000] ACPI: MCFG 0x00000000BFEB7080 00003C (v01 CORE \
COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: TCPA 0x00000000BFEB70C0 000032 \
(v02 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: APIC \
0x00000000BFEB7100 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] \
ACPI: RMAD 0x00000000BFEB7170 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) [ \
0.000000] ACPI: HPET 0x00000000BFEB7220 000038 (v01 CORE COREBOOT 00000000 CORE \
00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to Xen PV.
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013b5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0xbf6b6000-0xbf6c9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013b5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfe8bfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013b5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013b5fffff]
[ 0.000000] On node 0 totalpages: 1029162
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12219 pages used for memmap
[ 0.000000] DMA32 zone: 781964 pages, LIFO batch:31
[ 0.000000] Normal zone: 3800 pages used for memmap
[ 0.000000] Normal zone: 243200 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is a00000
[ 0.000000] Remapped 194872 page(s)
[ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.6.0 (preserve-AD)
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, \
max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 \
nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 34 \
pages/cpu @ffff88012f600000 s101080 r8192 d29992 u524288 [ 0.000000] pcpu-alloc: \
s101080 r8192 d29992 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: \
1013058 [ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=/dev/mapper/qubes_dom0-root ro \
i915.preliminary_hw_support=1 rd.lvm.lv=qubes_dom0/root \
rd.luks.uuid=luks-0f662ac6-2939-48fe-bc95-f5a7e3d6fefb \
vconsole.font=latarcyrheb-sun16 rd.lvm.lv=qubes_dom0/swap rhgb quiet [ 0.000000] \
PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled \
xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] software IO TLB \
[mem 0x12b600000-0x12f600000] (64MB) mapped at [ffff88012b600000-ffff88012f5fffff] [ \
0.000000] Memory: 3719972K/4116648K available (7578K kernel code, 1219K rwdata, 3272K \
rodata, 1504K init, 1464K bss, 396676K reserved, 0K cma-reserved) [ 0.000000] \
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] \
Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period \
acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to \
nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, \
nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, \
max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 2594.180 MHz processor
[ 2.053165] Calibrating delay loop (skipped), value calculated using timer \
frequency.. 5188.36 BogoMIPS (lpj=2594180) [ 2.053167] pid_max: default: 32768 \
minimum: 301 [ 2.053174] ACPI: Core revision 20150410
[ 2.063967] ACPI: All ACPI Tables successfully acquired
[ 2.064190] Security Framework initialized
[ 2.064199] AppArmor: AppArmor disabled by boot time parameter
[ 2.064758] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 2.065880] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.066324] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.066335] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.066579] Initializing cgroup subsys blkio
[ 2.066582] Initializing cgroup subsys memory
[ 2.066590] Initializing cgroup subsys devices
[ 2.066593] Initializing cgroup subsys freezer
[ 2.066596] Initializing cgroup subsys net_cls
[ 2.066599] Initializing cgroup subsys perf_event
[ 2.066601] Initializing cgroup subsys net_prio
[ 2.066604] Initializing cgroup subsys hugetlb
[ 2.066663] CPU: Physical Processor ID: 0
[ 2.066664] CPU: Processor Core ID: 0
[ 2.067007] mce: CPU supports 2 MCE banks
[ 2.067021] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 2.067022] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 2.067467] Freeing SMP alternatives memory: 28K (ffffffff81eaa000 - \
ffffffff81eb1000) [ 2.068773] ftrace: allocating 27794 entries in 109 pages
[ 2.081249] cpu 0 spinlock event irq 25
[ 2.089270] Performance Events: 16-deep LBR, IvyBridge events, Broken PMU hardware \
detected, using software events only. [ 2.089289] Failed to access perfctr msr \
(MSR c4 is 0) [ 2.089919] NMI watchdog: disabled (cpu0): hardware events not \
enabled [ 2.089921] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 2.089998] installing Xen timer for CPU 1
[ 2.090008] cpu 1 spinlock event irq 32
[ 2.090664] installing Xen timer for CPU 2
[ 2.090671] cpu 2 spinlock event irq 39
[ 2.091276] installing Xen timer for CPU 3
[ 2.091282] cpu 3 spinlock event irq 46
[ 2.091765] x86: Booted up 1 node, 4 CPUs
[ 2.091977] devtmpfs: initialized
[ 2.094519] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, \
max_idle_ns: 1911260446275000 ns [ 2.094636] atomic64_test: passed for x86-64 \
platform with CX8 and with SSE [ 2.094639] pinctrl core: initialized pinctrl \
subsystem [ 2.094689] RTC time: 18:56:35, date: 07/23/16
[ 2.094796] NET: Registered protocol family 16
[ 2.094807] xen:grant_table: Grant tables using version 1 layout
[ 2.094816] Grant table initialized
[ 2.095092] ACPI: bus type PCI registered
[ 2.095094] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.095229] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem \
0xf8000000-0xfbffffff] (base 0xf8000000) [ 2.095238] PCI: MMCONFIG at [mem \
0xf8000000-0xfbffffff] reserved in E820 [ 2.101399] PCI: Using configuration type \
1 for base access [ 2.105758] ACPI: Added _OSI(Module Device)
[ 2.105761] ACPI: Added _OSI(Processor Device)
[ 2.105762] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 2.105763] ACPI: Added _OSI(Processor Aggregator Device)
[ 2.106494] xen: registering gsi 9 triggering 0 polarity 0
[ 2.107230] ACPI: Executed 1 blocks of module-level executable AML code
[ 2.108945] ACPI : EC: EC started
[ 2.108995] ACPI: Interpreter enabled
[ 2.108999] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] \
(20150410/hwxface-580) [ 2.109003] ACPI Exception: AE_NOT_FOUND, While evaluating \
Sleep State [\_S2_] (20150410/hwxface-580) [ 2.109011] ACPI: (supports S0 S3 S5)
[ 2.109012] ACPI: Using IOAPIC for interrupt routing
[ 2.109034] PCI: Using host bridge windows from ACPI; if necessary, use \
"pci=nocrs" and report a bug [ 2.112685] ACPI: PCI Root Bridge [PCI0] (domain 0000 \
[bus 00-ff]) [ 2.112691] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM \
ClockPM Segments MSI] [ 2.112741] acpi PNP0A08:00: _OSC: OS now controls \
[PCIeHotplug PME AER PCIeCapability] [ 2.112813] acpi PNP0A08:00: ignoring host \
bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem \
0x000c0000-0x000c6fff]) [ 2.112816] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for \
domain 0000 [bus 00-3f] only partially covers this bridge [ 2.112958] PCI host \
bridge to bus 0000:00 [ 2.112961] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.112962] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 2.112964] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 2.112966] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 2.112967] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 2.112969] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 2.112970] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 2.112972] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 2.112973] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 2.112975] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 2.112976] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 2.112977] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 2.112979] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 2.112980] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 2.112982] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 2.112983] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 2.112985] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window]
[ 2.112986] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 2.112999] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 2.113147] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 2.113173] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 2.113189] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.113200] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 2.113332] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 2.113357] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[ 2.113549] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 2.113595] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[ 2.113753] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 2.113790] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 2.113851] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 2.113895] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[ 2.114058] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.114172] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 2.114208] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 2.114228] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[ 2.114249] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 2.114398] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 2.114486] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 2.114522] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[ 2.114689] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 2.114728] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2.114790] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 2.114828] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[ 2.114998] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.115042] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 2.115098] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 2.115270] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.115313] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 2.115318] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 2.115410] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 2.115580] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 2.115620] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 2.115624] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 2.115704] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 2.115872] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 2.115912] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 2.115916] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 2.116020] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 2.116057] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[ 2.116232] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.116273] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2.116328] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 2.116606] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 2.116647] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 2.116667] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 2.116687] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 2.116707] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 2.116727] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 2.116744] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[ 2.116844] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.116929] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 2.116971] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[ 2.117027] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 2.117272] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 2.117314] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 2.117371] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[ 2.117678] pci 0000:01:00.0: supports D1 D2
[ 2.117680] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.119442] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.119455] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 2.119809] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[ 2.120236] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf1501fff 64bit]
[ 2.121921] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.124628] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 2.124642] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 2.124776] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 2.124784] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 2.124791] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 2.124804] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit \
pref] [ 2.124982] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 2.125041] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 2.125096] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 2.125149] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 2.125201] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 2.125253] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 2.125306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 2.125359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 2.125894] xen: registering gsi 13 triggering 1 polarity 0
[ 2.126021] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 2.126074] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 2.126098] xen:balloon: Initialising balloon driver
[ 2.126676] xen_balloon: Initialising balloon driver
[ 2.126781] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 2.126783] vgaarb: device added: \
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.126787] vgaarb: loaded
[ 2.126788] vgaarb: bridge control possible 0000:00:02.0
[ 2.126862] SCSI subsystem initialized
[ 2.126916] libata version 3.00 loaded.
[ 2.126943] ACPI: bus type USB registered
[ 2.126962] usbcore: registered new interface driver usbfs
[ 2.126975] usbcore: registered new interface driver hub
[ 2.126997] usbcore: registered new device driver usb
[ 2.127150] PCI: Using ACPI for IRQ routing
[ 2.132172] PCI: pci_cache_line_size set to 64 bytes
[ 2.132328] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 2.132330] e820: reserve RAM buffer [mem 0xbfe8c000-0xbfffffff]
[ 2.132331] e820: reserve RAM buffer [mem 0x13b600000-0x13bffffff]
[ 2.132437] NetLabel: Initializing
[ 2.132438] NetLabel: domain hash size = 128
[ 2.132439] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.132450] NetLabel: unlabeled traffic allowed by default
[ 2.132572] Switched to clocksource xen
[ 2.138154] pnp: PnP ACPI init
[ 2.138245] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.138248] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.138249] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.138251] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.138252] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 2.138254] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.138255] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 2.138257] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.138259] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 2.138260] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 2.138264] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.138737] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 2.138740] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 2.138777] system 00:02: [io 0x0500-0x057f] could not be reserved
[ 2.138779] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 2.138781] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.138801] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.138814] xen: registering gsi 1 triggering 1 polarity 0
[ 2.138848] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 2.138858] xen: registering gsi 12 triggering 1 polarity 0
[ 2.138886] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 2.138997] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 2.139008] pnp: PnP ACPI: found 7 devices
[ 2.145813] PM-Timer failed consistency check (0xffffff) - aborting.
[ 2.145874] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.145885] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 2.145904] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 2.145913] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 2.145931] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 2.145935] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 2.145945] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 2.145951] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit \
pref] [ 2.145965] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 2.145966] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 2.145968] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 2.145970] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 2.145971] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 2.145973] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 2.145974] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 2.145976] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 2.145977] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 2.145979] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 2.145981] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 2.145982] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 2.145984] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 2.145985] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 2.145987] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 2.145988] pci_bus 0000:00: resource 19 [mem 0xc2a00000-0xf7ffffff window]
[ 2.145990] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 2.145992] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[ 2.145993] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 2.145995] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 2.145996] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 2.145998] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 2.146029] NET: Registered protocol family 2
[ 2.146230] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.146336] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 2.146400] TCP: Hash tables configured (established 32768 bind 32768)
[ 2.146426] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.146445] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.146491] NET: Registered protocol family 1
[ 2.146510] pci 0000:00:02.0: Video device with shadowed ROM
[ 2.146623] xen: registering gsi 19 triggering 0 polarity 1
[ 2.146635] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 2.146879] xen: registering gsi 21 triggering 0 polarity 1
[ 2.146886] xen: --> pirq=21 -> irq=21 (gsi=21)
[ 2.147086] xen: registering gsi 19 triggering 0 polarity 1
[ 2.147088] Already setup the GSI :19
[ 2.147234] PCI: CLS 64 bytes, default 64
[ 2.147287] Unpacking initramfs...
[ 2.177861] Freeing initrd memory: 37992K (ffff880004000000 - ffff88000651a000)
[ 2.177988] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 \
ms ovfl timer [ 2.177990] hw unit of domain pp0-core 2^-16 Joules
[ 2.177991] hw unit of domain package 2^-16 Joules
[ 2.177992] hw unit of domain pp1-gpu 2^-16 Joules
[ 2.178815] AVX version of gcm_enc/dec engaged.
[ 2.178817] AES CTR mode by8 optimization enabled
[ 2.182357] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.182850] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.182866] Initialise system trusted keyring
[ 2.182884] audit: initializing netlink subsys (disabled)
[ 2.182902] audit: type=2000 audit(1469300196.817:1): initialized
[ 2.183203] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.184444] zpool: loaded
[ 2.184446] zbud: loaded
[ 2.184628] VFS: Disk quotas dquot_6.6.0
[ 2.184660] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.185011] Key type big_key registered
[ 2.185762] alg: No test for stdrng (krng)
[ 2.185779] NET: Registered protocol family 38
[ 2.185789] Key type asymmetric registered
[ 2.185791] Asymmetric key parser 'x509' registered
[ 2.185829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.185889] io scheduler noop registered
[ 2.185893] io scheduler deadline registered
[ 2.185932] io scheduler cfq registered (default)
[ 2.186119] xen: registering gsi 17 triggering 0 polarity 1
[ 2.186132] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 2.186407] xen: registering gsi 21 triggering 0 polarity 1
[ 2.186410] Already setup the GSI :21
[ 2.186668] xen: registering gsi 19 triggering 0 polarity 1
[ 2.186670] Already setup the GSI :19
[ 2.186910] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.186913] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.186920] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.186950] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 2.186952] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.186959] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 2.186987] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 2.186994] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 2.186999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.187043] pciehp 0000:00:1c.2:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- \
MRL- Interlock- NoCompl+ LLActRep+ [ 2.187088] pciehp 0000:00:1c.2:pcie04: service \
driver pciehp loaded [ 2.187094] pciehp: PCI Express Hot Plug Controller Driver \
version: 0.4 [ 2.187120] intel_idle: MWAIT substates: 0x21120
[ 2.187121] intel_idle: v0.4 model 0x3A
[ 2.187122] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.187137] intel_idle: intel_idle yielding to none
[ 2.187304] ACPI: AC Adapter [AC] (off-line)
[ 2.187358] input: Sleep Button as \
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input0
[ 2.187361] ACPI: Sleep Button [SLPB]
[ 2.187393] input: Lid Switch as \
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input1
[ 2.187507] ACPI: Lid Switch [LID]
[ 2.187543] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.187545] ACPI: Power Button [PWRF]
[ 2.187663] Monitor-Mwait will be used to enter C-1 state
[ 2.187667] Monitor-Mwait will be used to enter C-2 state
[ 2.187670] Monitor-Mwait will be used to enter C-3 state
[ 2.188249] Warning: Processor Platform Limit not supported.
[ 2.189157] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.189159] ACPI: Thermal Zone [THM0] (52 C)
[ 2.189970] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.189972] ACPI: Thermal Zone [THM1] (27 C)
[ 2.189999] GHES: HEST is not enabled!
[ 2.190251] xen:xen_evtchn: Event-channel device installed
[ 2.191460] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.192554] hpet_acpi_add: no address or irqs in _CRS
[ 2.192630] Non-volatile memory driver v1.3
[ 2.192703] Linux agpgart interface v0.103
[ 2.193560] ahci 0000:00:1f.2: version 3.0
[ 2.193772] xen: registering gsi 17 triggering 0 polarity 1
[ 2.193775] Already setup the GSI :17
[ 2.193982] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.199046] ACPI: Battery Slot [BAT0] (battery present)
[ 2.199180] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.204637] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl \
SATA mode [ 2.204640] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led \
clo pio slum part apst [ 2.205288] scsi host0: ahci
[ 2.205492] scsi host1: ahci
[ 2.205634] scsi host2: ahci
[ 2.205746] scsi host3: ahci
[ 2.205854] scsi host4: ahci
[ 2.205962] scsi host5: ahci
[ 2.206003] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 59
[ 2.206006] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 59
[ 2.206009] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 59
[ 2.206010] ata4: DUMMY
[ 2.206011] ata5: DUMMY
[ 2.206012] ata6: DUMMY
[ 2.206089] libphy: Fixed MDIO Bus: probed
[ 2.206183] usbcore: registered new interface driver usbserial
[ 2.206189] usbcore: registered new interface driver usbserial_generic
[ 2.206197] usbserial: USB Serial support registered for generic
[ 2.206231] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 \
irq 1,12 [ 2.207948] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.207953] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.208069] mousedev: PS/2 mouse device common for all mice
[ 2.208245] rtc_cmos 00:03: RTC can wake from S4
[ 2.208441] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.208512] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram
[ 2.208556] device-mapper: uevent: version 1.0.3
[ 2.208653] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: \
dm-devel@redhat.com [ 2.208856] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.208916] usbcore: registered new interface driver usbhid
[ 2.208918] usbhid: USB HID core driver
[ 2.208973] drop_monitor: Initializing network drop monitor service
[ 2.209038] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.209274] Initializing XFRM netlink socket
[ 2.209371] NET: Registered protocol family 10
[ 2.209538] input: AT Translated Set 2 keyboard as \
/devices/platform/i8042/serio0/input/input3 [ 2.209693] mip6: Mobile IPv6
[ 2.209698] NET: Registered protocol family 17
[ 2.210042] Loading compiled-in X.509 certificates
[ 2.210055] registered taskstats version 1
[ 2.210550] Magic number: 8:535:949
[ 2.210555] mdio_bus fixed-0: hash matches
[ 2.210572] tty tty6: hash matches
[ 2.210593] memory memory2: hash matches
[ 2.210643] rtc_cmos 00:03: setting system clock to 2016-07-23 18:56:35 UTC \
(1469300195) [ 2.511648] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.511837] ata1.00: ATA-9: Patriot Blast, SAFM12.2, max UDMA/133
[ 2.511840] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.512009] ata1.00: configured for UDMA/133
[ 2.512194] scsi 0:0:0:0: Direct-Access ATA Patriot Blast 12.2 PQ: 0 \
ANSI: 5 [ 2.512406] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 \
GB/223 GiB) [ 2.512416] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.512473] sd 0:0:0:0: [sda] Write Protect is off
[ 2.512476] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.512501] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't \
support DPO or FUA [ 2.512858] sda: sda1 sda2
[ 2.513113] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.816645] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.123644] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.124490] Freeing unused kernel memory: 1504K (ffffffff81d32000 - \
ffffffff81eaa000) [ 3.124493] Write protecting the kernel read-only data: 12288k
[ 3.127444] Freeing unused kernel memory: 604K (ffff880001769000 - \
ffff880001800000) [ 3.127779] Freeing unused kernel memory: 824K (ffff880001b32000 \
- ffff880001c00000) [ 3.131634] systemd[1]: systemd 208 running in system mode. \
(+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ \
3.131679] systemd[1]: Detected virtualization 'xen'. [ 3.131683] systemd[1]: \
Running in initial RAM disk. [ 3.131747] systemd[1]: Set hostname to <dom0>.
[ 3.132425] random: systemd urandom read with 26 bits of entropy available
[ 3.177591] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2564c24d089, \
max_idle_ns: 440795301476 ns [ 3.178278] systemd[1]: Expecting device \
dev-mapper-qubes_dom0\x2droot.device... [ 3.178295] systemd[1]: Starting -.slice.
[ 3.178666] systemd[1]: Created slice -.slice.
[ 3.178678] systemd[1]: Starting System Slice.
[ 3.178761] systemd[1]: Created slice System Slice.
[ 3.178772] systemd[1]: Starting Slices.
[ 3.178784] systemd[1]: Reached target Slices.
[ 3.178793] systemd[1]: Starting Timers.
[ 3.178805] systemd[1]: Reached target Timers.
[ 3.178814] systemd[1]: Expecting device \
dev-disk-by\x2duuid-0f662ac6\x2d2939\x2d48fe\x2dbc95\x2df5a7e3d6fefb.device... [ \
3.178826] systemd[1]: Expecting device \
dev-mapper-luks\x2d0f662ac6\x2d2939\x2d48fe\x2dbc95\x2df5a7e3d6fefb.device... [ \
3.178837] systemd[1]: Starting Journal Socket. [ 3.178915] systemd[1]: Listening \
on Journal Socket. [ 3.179064] systemd[1]: Starting dracut cmdline hook...
[ 3.179914] systemd[1]: Starting Create list of required static device nodes for \
the current kernel... [ 3.180908] systemd[1]: Starting Load Kernel Modules...
[ 3.181745] systemd[1]: Starting Journal Service...
[ 3.185250] systemd[1]: Started Journal Service.
[ 3.186127] xen_pciback: backend is vpci
[ 3.280338] pciback 0000:00:19.0: seizing device
[ 3.380894] pciback 0000:02:00.0: seizing device
[ 3.381453] xen: registering gsi 17 triggering 0 polarity 1
[ 3.381458] Already setup the GSI :17
[ 3.600620] systemd-udevd[260]: starting version 208
[ 3.656101] [drm] Initialized drm 1.1.0 20060810
[ 3.656171] xen: registering gsi 19 triggering 0 polarity 1
[ 3.656179] Already setup the GSI :19
[ 3.656246] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.657489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.657840] ehci-pci: EHCI PCI platform driver
[ 3.658113] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.658248] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks \
0x0000b930 [ 3.658268] xhci_hcd 0000:00:14.0: cache line size of 64 is not \
supported [ 3.658721] usb usb1: New USB device found, idVendor=1d6b, \
idProduct=0002 [ 3.658725] usb usb1: New USB device strings: Mfr=3, Product=2, \
SerialNumber=1 [ 3.658728] usb usb1: Product: xHCI Host Controller
[ 3.658730] usb usb1: Manufacturer: Linux 4.1.13-9.pvops.qubes.x86_64 xhci-hcd
[ 3.658732] usb usb1: SerialNumber: 0000:00:14.0
[ 3.658936] hub 1-0:1.0: USB hub found
[ 3.658959] hub 1-0:1.0: 4 ports detected
[ 3.659155] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.659212] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.659283] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.659288] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.659290] usb usb2: Product: xHCI Host Controller
[ 3.659292] usb usb2: Manufacturer: Linux 4.1.13-9.pvops.qubes.x86_64 xhci-hcd
[ 3.659294] usb usb2: SerialNumber: 0000:00:14.0
[ 3.659452] hub 2-0:1.0: USB hub found
[ 3.659469] hub 2-0:1.0: 4 ports detected
[ 3.660078] xen: registering gsi 21 triggering 0 polarity 1
[ 3.660085] Already setup the GSI :21
[ 3.660135] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.660208] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.660236] ehci-pci 0000:00:1a.0: debug port 2
[ 3.664193] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.664899] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[ 3.670603] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.670677] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.670680] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.670682] usb usb3: Product: EHCI Host Controller
[ 3.670685] usb usb3: Manufacturer: Linux 4.1.13-9.pvops.qubes.x86_64 ehci_hcd
[ 3.670687] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.671275] hub 3-0:1.0: USB hub found
[ 3.671454] hub 3-0:1.0: 3 ports detected
[ 3.672301] xen: registering gsi 19 triggering 0 polarity 1
[ 3.672306] Already setup the GSI :19
[ 3.672358] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.672440] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.672464] ehci-pci 0000:00:1d.0: debug port 2
[ 3.676394] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.676444] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[ 3.681226] alg: No test for crc32 (crc32-pclmul)
[ 3.681625] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.681720] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.681723] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.681726] usb usb4: Product: EHCI Host Controller
[ 3.681728] usb usb4: Manufacturer: Linux 4.1.13-9.pvops.qubes.x86_64 ehci_hcd
[ 3.681730] usb usb4: SerialNumber: 0000:00:1d.0
[ 3.681935] hub 4-0:1.0: USB hub found
[ 3.681980] hub 4-0:1.0: 3 ports detected
[ 3.682646] xen: registering gsi 16 triggering 0 polarity 1
[ 3.682663] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 3.683909] [drm] Memory usable by graphics device = 2048M
[ 3.683913] [drm] Replacing VGA console driver
[ 3.684427] Console: switching to colour dummy device 80x25
[ 3.777193] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.777198] [drm] Driver supports precise vblank timestamp query.
[ 3.777318] vgaarb: device changed decodes: \
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.804469] ACPI: \
Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.805715] acpi \
device:03: registered as cooling_device4 [ 3.805772] input: Video Bus as \
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 3.805901] \
[drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0 [ 3.865647] \
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ \
3.875707] fbcon: inteldrmfb (fb0) is primary device [ 3.973674] usb 3-1: new \
high-speed USB device number 2 using ehci-pci [ 3.983643] usb 4-1: new high-speed \
USB device number 2 using ehci-pci [ 4.088238] usb 3-1: New USB device found, \
idVendor=8087, idProduct=0024 [ 4.088240] usb 3-1: New USB device strings: Mfr=0, \
Product=0, SerialNumber=0 [ 4.088660] hub 3-1:1.0: USB hub found
[ 4.088816] hub 3-1:1.0: 6 ports detected
[ 4.098090] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.098093] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.098336] hub 4-1:1.0: USB hub found
[ 4.098434] hub 4-1:1.0: 8 ports detected
[ 4.155467] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared \
pch fifo underrun on pch transcoder A [ 4.155489] \
[drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO \
underrun [ 4.177913] Switched to clocksource tsc
[ 4.363723] usb 3-1.4: new full-speed USB device number 3 using ehci-pci
[ 4.452877] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[ 4.452879] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.452880] usb 3-1.4: Product: BCM20702A0
[ 4.452881] usb 3-1.4: Manufacturer: Broadcom Corp
[ 4.452882] usb 3-1.4: SerialNumber: 7CE9D3E53934
[ 4.526723] usb 3-1.6: new high-speed USB device number 4 using ehci-pci
[ 4.620188] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[ 4.620190] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.620191] usb 3-1.6: Product: Integrated Camera
[ 4.620192] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 4.671815] Console: switching to colour frame buffer device 170x48
[ 4.674355] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.674355] i915 0000:00:02.0: registered panic notifier
[ 10.090840] random: nonblocking pool is initialized
[ 15.776335] EXT4-fs (dm-2): INFO: recovery required on readonly filesystem
[ 15.776339] EXT4-fs (dm-2): write access will be enabled during recovery
[ 15.925671] EXT4-fs (dm-2): recovery complete
[ 15.926825] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: \
(null) [ 16.058297] systemd-journald[140]: Received SIGTERM
[ 16.149991] systemd[1]: RTC configured in localtime, applying delta of -240 \
minutes to system time. [ 16.340514] xen_acpi_processor: Uploading Xen processor PM \
info [ 16.367450] systemd-udevd[669]: starting version 208
[ 16.370674] EXT4-fs (dm-2): re-mounted. Opts: (null)
[ 16.438149] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F \
conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) \
(20150410/utaddress-254) [ 16.438156] ACPI: If an ACPI driver is available for this \
device, you should use it instead of the native driver [ 16.438162] ACPI Warning: \
SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion \
0x0000000000000480-0x00000000000004EB (\GPIO) (20150410/utaddress-254) [ 16.438166] \
ACPI: If an ACPI driver is available for this device, you should use it instead of \
the native driver [ 16.438167] ACPI Warning: SystemIO range \
0x00000000000004B0-0x00000000000004BF conflicts with OpRegion \
0x0000000000000480-0x00000000000004EB (\GPIO) (20150410/utaddress-254) [ 16.438171] \
ACPI: If an ACPI driver is available for this device, you should use it instead of \
the native driver [ 16.438172] ACPI Warning: SystemIO range \
0x0000000000000480-0x00000000000004AF conflicts with OpRegion \
0x0000000000000480-0x00000000000004EB (\GPIO) (20150410/utaddress-254) [ 16.438176] \
ACPI: If an ACPI driver is available for this device, you should use it instead of \
the native driver [ 16.438177] lpc_ich: Resource conflict(s) found affecting \
gpio_ich [ 16.439362] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.440520] pps_core: LinuxPPS API ver. 1 registered
[ 16.440523] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti \
<giometti@linux.it> [ 16.441544] PTP clock support registered
[ 16.448236] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 16.448240] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 16.492530] cfg80211: Calling CRDA to update world regulatory domain
[ 16.493278] xen: registering gsi 23 triggering 0 polarity 1
[ 16.493296] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 16.493384] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 16.494697] sdhci: Secure Digital Host Controller Interface driver
[ 16.494700] sdhci: Copyright(c) Pierre Ossman
[ 16.495487] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 16.495493] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 16.495496] thinkpad_acpi: ThinkPad BIOS CBET4000 4.4-905-g03a2005, EC \
G2HT35WW-3.22 [ 16.495497] thinkpad_acpi: Lenovo ThinkPad X230, model 2325AP7
[ 16.495887] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 16.496308] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 16.496928] xen: registering gsi 16 triggering 0 polarity 1
[ 16.496950] Already setup the GSI :16
[ 16.498021] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 16.498121] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 16.498152] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness \
control, supported by the ACPI video driver [ 16.498153] thinkpad_acpi: Disabling \
thinkpad-acpi brightness events by default... [ 16.498347] sdhci-pci 0000:01:00.0: \
No vmmc regulator found [ 16.498350] sdhci-pci 0000:01:00.0: No vqmmc regulator \
found [ 16.501451] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 16.503762] thinkpad_acpi: Standard ACPI backlight interface available, not \
loading native one [ 16.503886] thinkpad_acpi: Console audio control enabled, mode: \
monitor (read only) [ 16.506043] input: ThinkPad Extra Buttons as \
/devices/platform/thinkpad_acpi/input/input7 [ 16.507949] Intel(R) Wireless WiFi \
driver for Linux [ 16.507952] Copyright(c) 2003- 2015 Intel Corporation
[ 16.528507] intel_rapl: Found RAPL domain package
[ 16.528513] intel_rapl: Found RAPL domain core
[ 16.528516] intel_rapl: Found RAPL domain uncore
[ 16.562710] xen: registering gsi 16 triggering 0 polarity 1
[ 16.562720] Already setup the GSI :16
[ 16.568876] iTCO_vendor_support: vendor-support=0
[ 16.569668] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 16.569709] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 16.569801] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.580040] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: \
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 16.580045] snd_hda_codec_realtek \
hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 16.580048] \
snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [ \
16.580050] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 16.580051] \
snd_hda_codec_realtek hdaudioC0D0: inputs: [ 16.580054] snd_hda_codec_realtek \
hdaudioC0D0: Mic=0x18 [ 16.580055] snd_hda_codec_realtek hdaudioC0D0: \
Dock Mic=0x19 [ 16.580057] snd_hda_codec_realtek hdaudioC0D0: Internal \
Mic=0x12 [ 16.606699] input: HDA Intel PCH Mic as \
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 16.606849] input: HDA Intel \
PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 16.607145] \
input: HDA Intel PCH Headphone as \
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 16.607238] input: HDA Intel \
PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ \
16.607373] input: HDA Intel PCH HDMI/DP,pcm=3 as \
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 16.607461] input: HDA Intel \
PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ \
16.607673] input: HDA Intel PCH HDMI/DP,pcm=8 as \
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 16.639426] Bluetooth: Core \
ver 2.20 [ 16.639454] NET: Registered protocol family 31
[ 16.639456] Bluetooth: HCI device and connection manager initialized
[ 16.639461] Bluetooth: HCI socket layer initialized
[ 16.639464] Bluetooth: L2CAP socket layer initialized
[ 16.639472] Bluetooth: SCO socket layer initialized
[ 16.643358] media: Linux media interface: v0.10
[ 16.646117] usbcore: registered new interface driver btusb
[ 16.647600] Linux video capture interface: v2.00
[ 16.653133] Bluetooth: hci0: BCM: chip id 63
[ 16.654167] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 16.655464] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 16.658786] input: Integrated Camera as \
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input16 [ \
16.660252] usbcore: registered new interface driver uvcvideo [ 16.660256] USB Video \
Class driver (1.1.1) [ 16.662640] bluetooth hci0: Direct firmware load for \
brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 [ 16.662648] Bluetooth: hci0: \
BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found [ 16.693264] Adding 3555324k \
swap on /dev/mapper/qubes_dom0-swap. Priority:-1 extents:1 across:3555324k SSFS [ \
16.719000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ \
17.244608] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ \
17.258628] input: TPPS/2 IBM TrackPoint as \
/devices/platform/i8042/serio1/input/input8 [ 17.757339] systemd-journald[649]: \
Received request to flush runtime journal from PID 1 [ 17.767734] \
systemd-journald[649]: File \
/var/log/journal/611128c0705f40d0ace00849b3a40ca3/system.journal corrupted or \
uncleanly shut down, renaming and replacing. [ 17.783861] audit: type=1305 \
audit(1469314611.071:2): audit_pid=940 old=0 auid=4294967295 ses=4294967295 res=1 [ \
18.260409] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 18.303874] \
ip6_tables: (C) 2000-2006 Netfilter Core Team [ 18.428950] Ebtables v2.0 registered
[ 18.459340] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. \
Update your scripts to load br_netfilter if you need this. [ 19.640107] cfg80211: \
Calling CRDA to update world regulatory domain [ 22.782150] cfg80211: Calling CRDA \
to update world regulatory domain [ 23.706827] loop: module loaded
[ 24.476470] xen_pciback: vpci: 0000:00:19.0: assign to virtual slot 0
[ 24.477536] pciback 0000:00:19.0: registering for 1
[ 24.478011] xen_pciback: vpci: 0000:02:00.0: assign to virtual slot 1
[ 24.479075] pciback 0000:02:00.0: registering for 1
[ 25.847584] xen-blkback: ring-ref 8, event-channel 31, protocol 1 (x86_64-abi) \
persistent grants [ 25.859268] xen-blkback: ring-ref 9, event-channel 32, protocol \
1 (x86_64-abi) persistent grants [ 25.881314] xen-blkback: ring-ref 10, \
event-channel 33, protocol 1 (x86_64-abi) persistent grants [ 25.887659] \
xen-blkback: ring-ref 12, event-channel 34, protocol 1 (x86_64-abi) persistent grants \
[ 25.924239] cfg80211: Calling CRDA to update world regulatory domain [ \
27.119375] pciback 0000:00:19.0: enabling device (0000 -> 0003) [ 27.122992] \
pciback 0000:00:19.0: Driver tried to write to a read-only configuration space field \
at offset 0xd2, size 2. This may be harmless, but if you have problems with your \
device: 1) see permissive attribute in sysfs
2) report problems to the xen-devel mailing list along with details of your device \
obtained from lspci. [ 27.129983] pciback 0000:02:00.0: enabling device (0000 -> \
0002) [ 27.130421] xen: registering gsi 17 triggering 0 polarity 1
[ 27.130427] Already setup the GSI :17
[ 27.135402] xen: registering gsi 17 triggering 0 polarity 1
[ 27.135409] Already setup the GSI :17
[ 27.138022] xen: registering gsi 17 triggering 0 polarity 1
[ 27.138029] Already setup the GSI :17
[ 27.140130] xen: registering gsi 17 triggering 0 polarity 1
[ 27.140136] Already setup the GSI :17
[ 27.142032] xen: registering gsi 17 triggering 0 polarity 1
[ 27.142039] Already setup the GSI :17
[ 27.143739] xen: registering gsi 17 triggering 0 polarity 1
[ 27.143744] Already setup the GSI :17
[ 27.144720] pciback 0000:02:00.0: Driver tried to write to a read-only \
configuration space field at offset 0xd2, size 2. This may be harmless, but if you \
have problems with your device: 1) see permissive attribute in sysfs
2) report problems to the xen-devel mailing list along with details of your device \
obtained from lspci. [ 29.066435] cfg80211: Calling CRDA to update world regulatory \
domain [ 32.208384] cfg80211: Calling CRDA to update world regulatory domain
[ 33.043558] xen-blkback: ring-ref 8, event-channel 31, protocol 1 (x86_64-abi) \
persistent grants [ 33.057007] xen-blkback: ring-ref 9, event-channel 32, protocol \
1 (x86_64-abi) persistent grants [ 33.079689] xen-blkback: ring-ref 10, \
event-channel 33, protocol 1 (x86_64-abi) persistent grants [ 33.090298] \
xen-blkback: ring-ref 12, event-channel 34, protocol 1 (x86_64-abi) persistent grants \
[ 35.350611] cfg80211: Calling CRDA to update world regulatory domain [ \
37.895202] systemd-journald[649]: File \
/var/log/journal/611128c0705f40d0ace00849b3a40ca3/user-994.journal corrupted or \
uncleanly shut down, renaming and replacing. [ 38.492634] cfg80211: Calling CRDA to \
update world regulatory domain [ 41.634812] cfg80211: Calling CRDA to update world \
regulatory domain [ 44.776842] cfg80211: Calling CRDA to update world regulatory \
domain [ 47.377275] systemd-journald[649]: File \
/var/log/journal/611128c0705f40d0ace00849b3a40ca3/user-1000.journal corrupted or \
uncleanly shut down, renaming and replacing. [ 47.918862] cfg80211: Calling CRDA to \
update world regulatory domain [ 51.060928] cfg80211: Exceeded CRDA call max \
attempts. Not calling CRDA [ 82.468521] xen-blkback: ring-ref 8, event-channel 10, \
protocol 1 (x86_64-abi) persistent grants [ 82.506213] xen-blkback: ring-ref 9, \
event-channel 11, protocol 1 (x86_64-abi) persistent grants [ 82.527707] \
xen-blkback: ring-ref 10, event-channel 12, protocol 1 (x86_64-abi) persistent grants \
[ 82.546955] xen-blkback: ring-ref 11, event-channel 13, protocol 1 (x86_64-abi) \
persistent grants [ 99.843099] xen-blkback: ring-ref 8, event-channel 10, protocol \
1 (x86_64-abi) persistent grants [ 99.861213] xen-blkback: ring-ref 10, \
event-channel 11, protocol 1 (x86_64-abi) persistent grants [ 99.888185] \
xen-blkback: ring-ref 11, event-channel 12, protocol 1 (x86_64-abi) persistent grants \
[ 107.766132] [drm:i915_hangcheck_elapsed [i915]] *ERROR* Hangcheck timer elapsed... \
bsd ring idle [ 135.856182] atkbd serio0: Unknown key pressed (translated set 2, \
code 0xd8 on isa0060/serio0). [ 135.856192] atkbd serio0: Use 'setkeycodes e058 \
<keycode>' to make it known. [ 135.856634] atkbd serio0: Unknown key released \
(translated set 2, code 0xd8 on isa0060/serio0). [ 135.856649] atkbd serio0: Use \
'setkeycodes e058 <keycode>' to make it known. [ 137.634974] PM: Syncing filesystems \
... done. [ 137.651178] PM: Preparing system for mem sleep
[ 137.651244] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 137.652890] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 137.653991] PM: Entering mem sleep
[ 137.654002] Suspending console(s) (use no_console_suspend to debug)
[ 137.654449] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 137.655186] sd 0:0:0:0: [sda] Stopping disk
[ 138.096915] PM: suspend of devices complete after 442.803 msecs
[ 138.108502] PM: late suspend of devices complete after 11.578 msecs
[ 138.110523] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 138.110993] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 138.111426] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 138.122468] PM: noirq suspend of devices complete after 13.959 msecs
[ 138.122913] ACPI: Preparing to enter system sleep state S3
[ 138.190442] ACPI : EC: EC stopped
[ 138.190444] PM: Saving platform NVS memory
[ 138.190445] Disabling non-boot CPUs ...
[ 138.190807] Broke affinity for irq 67
[ 138.190811] Broke affinity for irq 71
[ 138.190815] Broke affinity for irq 76
[ 138.190819] Broke affinity for irq 80
[ 138.190837] Broke affinity for irq 96
[ 138.190843] Broke affinity for irq 100
[ 138.291428] smpboot: CPU 1 is now offline
[ 138.295772] Broke affinity for irq 52
[ 138.295777] Broke affinity for irq 64
[ 138.295779] Broke affinity for irq 68
[ 138.295782] Broke affinity for irq 72
[ 138.295785] Broke affinity for irq 77
[ 138.295789] Broke affinity for irq 81
[ 138.295792] Broke affinity for irq 85
[ 138.295796] Broke affinity for irq 97
[ 138.396433] smpboot: CPU 2 is now offline
[ 138.400165] Broke affinity for irq 61
[ 138.400167] Broke affinity for irq 65
[ 138.400169] Broke affinity for irq 69
[ 138.400171] Broke affinity for irq 73
[ 138.400173] Broke affinity for irq 78
[ 138.400175] Broke affinity for irq 82
[ 138.400177] Broke affinity for irq 83
[ 138.500428] smpboot: CPU 3 is now offline
[ 139.238082] ACPI: Low-level resume complete
[ 139.238156] ACPI : EC: EC started
[ 139.238156] PM: Restoring platform NVS memory
[ 139.238161] Using NULL legacy PIC
[ 139.238338] Enabling non-boot CPUs ...
[ 139.238377] installing Xen timer for CPU 1
[ 139.238401] cpu 1 spinlock event irq 32
[ 139.245159] cache: parent cpu1 should not be sleeping
[ 139.245240] CPU1 is up
[ 139.245254] installing Xen timer for CPU 2
[ 139.245271] cpu 2 spinlock event irq 39
[ 139.251204] cache: parent cpu2 should not be sleeping
[ 139.251288] CPU2 is up
[ 139.251302] installing Xen timer for CPU 3
[ 139.251320] cpu 3 spinlock event irq 46
[ 139.257398] cache: parent cpu3 should not be sleeping
[ 139.257468] CPU3 is up
[ 139.257470] ACPI: Waking up from system sleep state S3
[ 139.318116] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 139.318180] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 139.318219] mei_me 0000:00:16.0: Refused to change power state, currently in D3
[ 139.319186] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 139.319404] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to \
50Mhz. [ 139.378825] PM: noirq resume of devices complete after 71.922 msecs
[ 139.379252] PM: early resume of devices complete after 0.318 msecs
[ 139.379344] mei_me 0000:00:16.0: request_threaded_irq failed: irq = 0.
[ 139.379350] dpm_run_callback(): pci_pm_resume+0x0/0xc0 returns -38
[ 139.379352] PM: Device 0000:00:16.0 failed to resume async: error -38
[ 139.380135] rtc_cmos 00:03: System wakeup disabled by ACPI
[ 139.380641] sd 0:0:0:0: [sda] Starting disk
[ 139.607025] usb 3-1.4: reset full-speed USB device number 3 using ehci-pci
[ 139.640967] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared \
pch fifo underrun on pch transcoder A [ 139.641014] \
[drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO \
underrun [ 139.684891] ata2: SATA link down (SStatus 0 SControl 300)
[ 139.684930] ata3: SATA link down (SStatus 0 SControl 300)
[ 139.686970] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 139.687704] ata1.00: configured for UDMA/133
[ 140.127646] PM: resume of devices complete after 748.384 msecs
[ 140.128633] PM: Finishing wakeup.
[ 140.128636] Restarting tasks ...
[ 140.133322] Bluetooth: hci0: BCM: chip id 63
[ 140.134314] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 140.144583] done.
[ 140.144612] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd \
failed with error -2 [ 140.144619] Bluetooth: hci0: BCM: Patch \
brcm/BCM20702A1-0a5c-21e6.hcd not found [ 140.158746] video LNXVIDEO:00: Restoring \
backlight state [ 159.704100] xen-blkback: ring-ref 8, event-channel 31, protocol 1 \
(x86_64-abi) persistent grants [ 159.739131] xen-blkback: ring-ref 9, event-channel \
32, protocol 1 (x86_64-abi) persistent grants [ 159.773991] xen-blkback: ring-ref \
10, event-channel 33, protocol 1 (x86_64-abi) persistent grants [ 159.804517] \
xen-blkback: ring-ref 11, event-channel 34, protocol 1 (x86_64-abi) persistent grants \
[ 759.799332] [Firmware Bug]: battery: (dis)charge rate invalid.
--
You received this message because you are subscribed to the Google Groups \
"qubes-devel" group. To unsubscribe from this group and stop receiving emails from \
it, send an email to qubes-devel+unsubscribe@googlegroups.com. To post to this group, \
send email to qubes-devel@googlegroups.com. To view this discussion on the web visit \
https://groups.google.com/d/msgid/qubes-devel/20160724174753.GY16348%40chishio.swcp.com.
For more options, visit https://groups.google.com/d/optout.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic