[prev in list] [next in list] [prev in thread] [next in thread] 

List:       quagga-users
Subject:    [quagga-users 12012] Re: bgp learned default route not installed in
From:       Jonathan Petersson <jpetersson () garnser ! se>
Date:       2010-12-14 8:41:31
Message-ID: AANLkTinRCvYOViRZe2=49+Wjadd7fVhU20ELBZHS7phc () mail ! gmail ! com
[Download RAW message or body]

Hm, afaik you shouldn't need any additional configuration.

Enable zebra debug mode and see if you get any interesting data.

Have you looked at "ip route show t all" to see if the route is
injected into some table?

On Wed, Dec 8, 2010 at 6:04 PM, Athiqur Rahman <subs@arahmantech.com> wrote:
> Zebra Daemon is running. It is running out of the box, i havn't changed the
> config for it much. Does it need further configuring?
>
> zebra.conf
>
> Current configuration:
> !
> hostname routerx
> password letmein
> log file /var/log/quagga/zebra.log informational
> log stdout
> !
> interface eth0
> ipv6 nd suppress-ra
> !
> interface eth1
> ipv6 nd suppress-ra
> !
> interface eth2
> ipv6 nd suppress-ra
> !
> interface eth3
> ipv6 nd suppress-ra
> !
> interface lo
> !
> interface sit0
> ipv6 nd suppress-ra
> !
> ip forwarding
> !
> !
> line vty
> !
> end
>
>
> Jonathan Petersson wrote:
>>
>> You need to run the zebra daemon as well
>>
>> On Wed, Dec 8, 2010 at 4:48 PM, Athiqur Rahman <subs@arahmantech.com>
>> wrote:
>>
>>>
>>> Hi,
>>>
>>> The default route that I am receiving from my BGP peer is not being
>>> installed in my linux routing table. I have setup BGP on a cisco router
>>> with
>>> similar configuration to this and the deafult route got installed in the
>>> routing table. Please advise.
>>>
>>> Below are the relevant details
>>>
>>> bgpd.conf
>>> Current configuration:
>>> !
>>> hostname routerx
>>> password letmein
>>> log stdout
>>> !
>>> router bgp 2000
>>> bgp router-id 200.73.66.9
>>> network 200.73.66.0/23
>>> neighbor 90.60.244.209 remote-as 1000
>>> !
>>> ip prefix-list adv-external seq 10 permit 200.73.64.0/20
>>> ip prefix-list adv-external seq 100 deny any
>>> !
>>> line vty
>>> !
>>> end
>>>
>>> routerx# sh ip bgp neighbors 90.60.244.209 routes
>>> BGP table version is 0, local router ID is 200.73.66.9
>>> Status codes: s suppressed, d damped, h history, * valid, > best, i -
>>> internal
>>> Origin codes: i - IGP, e - EGP, ? - incomplete
>>>
>>>  Network          Next Hop            Metric LocPrf Weight Path
>>> *> 0.0.0.0          90.60.244.209            0             0 1000 i
>>>
>>> [root@routerX quagga]# rpm -qa | grep quagga
>>> quagga-0.98.6-5.el5_5.1
>>> [root@routerX quagga]# uname -a
>>> Linux routerX.telecom2.net 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:35 EDT
>>> 2010
>>> i686 i686 i386 GNU/Linux
>>> [root@routerX quagga]# cat /etc/issue
>>> CentOS release 5.5 (Final)
>>> Kernel \r on an \m
>>>
>>>
>>> Thanks,
>>>
>>> --Athiq
>>>
>>> _______________________________________________
>>> Quagga-users mailing list
>>> Quagga-users@lists.quagga.net
>>> http://lists.quagga.net/mailman/listinfo/quagga-users
>>>
>>>
>>
>> _______________________________________________
>> Quagga-users mailing list
>> Quagga-users@lists.quagga.net
>> http://lists.quagga.net/mailman/listinfo/quagga-users
>>
>
> _______________________________________________
> Quagga-users mailing list
> Quagga-users@lists.quagga.net
> http://lists.quagga.net/mailman/listinfo/quagga-users
>
_______________________________________________
Quagga-users mailing list
Quagga-users@lists.quagga.net
http://lists.quagga.net/mailman/listinfo/quagga-users

[prev in list] [next in list] [prev in thread] [next in thread]