[prev in list] [next in list] [prev in thread] [next in thread] 

List:       qmailadmin
Subject:    [qmailadmin] 1.0.6 not displaying user list
From:       Jonathan Chaillet <chaillet () chaillet ! org>
Date:       2002-11-26 17:58:25
[Download RAW message or body]

I have recently (this past week) upgraded vpopmail (5.2.1), sqwebmail,
ezmlm, courier-imap, and qmailadmin (1.0.6). Everything works fine
except for user list in qmailadmin. vpopmail is using vpasswd auth only
with plaintext enabled, although there are ~2500 existing crypt()'d
accounts. I have read everything I could find in the qmailadmin
mailinglist archives, but found no clear solution. So I have ~3000 email
accounts accross ~100 domains where some are the old crypt() encoding,
and the new ones are plaintext, and qmailadmin sees none of them. Any
assistance and/or insights would be greatly appreciated :)

	- jonathan

Here are the configure lines I used for vpopmail and qmailadmin:

vpopmail-5.2.1
./configure --prefix=/var/vpopmail --enable-vpopuser=vpopmail
--enable-vpopgroup=vchkpw --enable-roaming-users=y
--enable-tcprules-prog=/usr/bin/tcprules
--enable-tcpserver-file=/var/vpopmail/etc/tcp.smtp
--enable-relay-clear-minutes=90 --enable-learn-passwords=y
--enable-md5-passwords=n --enable-clear-passwd=y --enable-logging=y
--enable-log-name=vpopmail --enable-domains-dir=domains
--enable-ip-alias-domains=n

qmailadmin-1.0.6
./configure --enable-qmaildir=/var/qmail
--enable-vpopmaildir=/var/vpopmail
--enable-cgibindir=/home/www/www.ipninc.net/https/cgi-bin
--enable-htmldir=/home/www/www.ipninc.net/https/html/qmailadmin
--with-htmllibdir=/home/www/www.ipninc.net/https/html/qmailadmin/lib
--enable-cgipath=/cgi-bin/qmailadmin --enable-vpopuser=vpopmail
--enable-vpopgroup=vchkpw
--enable-autoresponder-bin=/usr/bin/autorespond
--enable-ezmlmdir=/var/ezmlm --enable-maxpopusers=-1
--enable-maxaliases=-1 --enable-maxforwards=-1
--enable-maxautorepsonders=-1 --enable-maxmailinglists=-1

[prev in list] [next in list] [prev in thread] [next in thread]