[prev in list] [next in list] [prev in thread] [next in thread] 

List:       pykde
Subject:    Re: [PyQt] Simple Examples for using SIP with PyQt5
From:       Robert Kent <rob () gulon ! co ! uk>
Date:       2015-08-27 12:32:08
Message-ID: BE613FCA-AAED-4CE2-B9F0-F8187B426B82 () gulon ! co ! uk
[Download RAW message or body]

And we have lift off!! If I build the library statically with MSVC2010 I get a \
working .pyd. I'll update my github example once I've tidied up my configuration.py.

Thanks for all the help folks, Rob

> On 27 Aug 2015, at 12:18, Robert Kent <rob@gulon.co.uk> wrote:
> 
> Thanks again Phil. That's what I thought. I just wish I could get a more useful \
> debug output when the DLL is loaded: which procedure can't be found?! I'm going to \
> setup Qt with MSVC 2010 and see if I can build it with that instead. 
> Cheers, Rob
> 
> 
> 
> > On 27 Aug 2015, at 12:12, Phil Thompson <phil@riverbankcomputing.com> wrote:
> > 
> > On 27 Aug 2015, at 11:48 am, Robert Kent <rob@gulon.co.uk> wrote:
> > > 
> > > Thanks Phil. Do I need to build my bindings with the same compiler or should be \
> > > able to do this with mingw? Cheers, Rob
> > 
> > I would have thought you could use mingw - but I don't use it myself.
> > 
> > Phil
> 
> _______________________________________________
> PyQt mailing list    PyQt@riverbankcomputing.com
> https://www.riverbankcomputing.com/mailman/listinfo/pyqt

_______________________________________________
PyQt mailing list    PyQt@riverbankcomputing.com
https://www.riverbankcomputing.com/mailman/listinfo/pyqt


[prev in list] [next in list] [prev in thread] [next in thread]