[prev in list] [next in list] [prev in thread] [next in thread] 

List:       pfsense-support
Subject:    [pfSense Support] In/Out errors on WLAN interface
From:       Michael Schmitt <stiffler () linuxnoob ! net>
Date:       2009-03-22 1:24:32
Message-ID: 49C59350.403 () linuxnoob ! net
[Download RAW message or body]

Hello list,

My pfsense box is a ALIX 2d3 Board. version pfsense is 1.2.2

My porblem is, that i have a lot of in/out errors on the Wlan interface.
I tried all combinations of rxantenna, txantenna and diversity.
But it is not getting better.

Another thing is, when i set txantenna=0, rxantenna=1 and make then for
example a refresh of the "status-interface-site", the system changes
rxantenna to 2.

see attached some more information:

dev.ath.0.%desc: Atheros 5212
dev.ath.0.%driver: ath
dev.ath.0.%location: slot=12 function=0
dev.ath.0.%pnpinfo: vendor=0x168c device=0x001b subvendor=0x168c
subdevice=0x2062 class=0x020000
dev.ath.0.%parent: pci0
dev.ath.0.smoothing_rate: 95
dev.ath.0.sample_rate: 10
dev.ath.0.countrycode: 0
dev.ath.0.regdomain: 0
dev.ath.0.slottime: 9
dev.ath.0.acktimeout: 48
dev.ath.0.ctstimeout: 48
dev.ath.0.softled: 0
dev.ath.0.ledpin: 0
dev.ath.0.ledon: 0
dev.ath.0.ledidle: 270
dev.ath.0.txantenna: 0
dev.ath.0.rxantenna: 2
dev.ath.0.diversity: 1
dev.ath.0.txintrperiod: 5
dev.ath.0.diag: 0
dev.ath.0.tpscale: 1
dev.ath.0.tpc: 0
dev.ath.0.tpack: 63
dev.ath.0.tpcts: 63
dev.ath.0.fftxqmin: 2
dev.ath.0.fftxqmax: 50
dev.ath.0.monpass: 24

stifflerwall:~#  ifconfig -v ath0
ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
0 mtu 1500
	ether xx:xx:xx:xx:xx:xx
	inet6 fe80::280:48ff:fe60:711a%ath0 prefixlen 64 scopeid 0x4
	media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
	status: associated
	ssid stiffler_wlan channel 4 (2427 Mhz 11g) bssid xx:xx:xx:xx:xx:xx
	authmode WPA1+WPA2/802.11i privacy MIXED deftxkey 3
	TKIP 2:128-bit
	TKIP 3:128-bit powersavemode OFF powersavesleep 100 txpower 31.5
	txpowmax 20.0 rtsthreshold 2346 fragthreshold 2346 bmiss 7
	scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11a 7
	roam:rate11a 12 roam:rssi11b 7 roam:rate11b 1 roam:rssi11g 7
	roam:rate11g 5 pureg protmode OFF -ht -htcompat -ampdu ampdulimit 8k
	ampdudensity - -amsdu -shortgi htprotmode RTSCTS -puren wme burst -ff
	-dturbo -hidessid apbridge dtimperiod 1 doth inact bintval 100
	AC_BE cwmin  4 cwmax  6 aifs  3 txopLimit   0 -acm ack
	      cwmin  4 cwmax 10 aifs  3 txopLimit   0 -acm
	AC_BK cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm ack
	      cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm
	AC_VI cwmin  3 cwmax  4 aifs  1 txopLimit  94 -acm ack
	      cwmin  3 cwmax  4 aifs  2 txopLimit  94 -acm
	AC_VO cwmin  2 cwmax  3 aifs  1 txopLimit  47 -acm ack
	      cwmin  2 cwmax  3 aifs  2 txopLimit  47 -acm


WLAN	 interface (ath0)
Status	 associated
MAC address	 xx:xx:xx:xx:xx:xx
Media	 autoselect mode 11g <hostap>
Channel	 4
SSID	 stiffler_wlan
In/out packets	 43127/50993 (3.77 MB/20.57 MB)
In/out errors	 125590/595
Collisions	 0
Bridge (bridge0)	 learning

Thanks for any ideas!
Greatings Michael

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe@pfsense.com
For additional commands, e-mail: support-help@pfsense.com

Commercial support available - https://portal.pfsense.org

[prev in list] [next in list] [prev in thread] [next in thread]