[prev in list] [next in list] [prev in thread] [next in thread] 

List:       pfsense-support
Subject:    Re: [pfSense Support] network interfaces not active
From:       "Scott Ullrich" <sullrich () gmail ! com>
Date:       2006-04-27 15:48:30
Message-ID: d5992baf0604270848n5ce28a95u42e3b4ae2b2be4a0 () mail ! gmail ! com
[Download RAW message or body]

You can do this, and it will work, but it will be whiped out on the
next major update.   I would utilize the hidden-options feature to
insert these commands on bootup by config.xml.

Scott


On 4/27/06, Bernhard Ledermann <bernhard.ledermann@aarenet.com> wrote:
>
>
>
> I found a solution for this problem:
>
>
>
> I had to add the following entries to activate both interfaces below
> /etc/inc/interfaces.inc in the section /* media */:
>
>
>
>   mwexec("/sbin/ifconfig dc0 media 100baseTX mediaopt full-duplex");
>
>   mwexec("/sbin/ifconfig dc1 media 100baseTX mediaopt full-duplex");
>
>
>
> I don't know if these entries are correctly placed or not, but it works!
>
>
>
> Bernie
>
>
>
>
>
>  ________________________________
>
>
> Von: Bernhard Ledermann
>  Gesendet: Mittwoch, 26. April 2006 11:50
>  An: 'support@pfsense.com'
>  Betreff: network interfaces not active
>
>
>
>
> If have installed the pfsense BETA3 on a NOKIA IP330.
>
> Everything went fine and the additional DUAL PORT 10/100 ETHERNET INTERFACE
> CARD was detected but is not active.
>
> That means I can see the following in the system log but if I plug an
> Ethernet cable in one of those connector, I get no link signal:
>
>
>
> kernel: dc0: <Intel 21143 10/100BaseTX> port 0xe000-0xe07f mem
> 0xd8000000-0xd80003ff irq 10 at device 5.0 on pci1
>
> kernel: dc0: Ethernet address: 00:c0:95:e2:9f:18
>
>
>
> kernel: dc1: <Intel 21143 10/100BaseTX> port 0xe400-0xe47f mem
> 0xd8001000-0xd80013ff irq 12 at device 6.0 on pci1
>
> kernel: dc1: Ethernet address: 00:c0:95:e2:9f:19
>
>
>
> The three onboard Ethernet connectors are available and active.
>
>
>
> Any idea about that?
>

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe@pfsense.com
For additional commands, e-mail: support-help@pfsense.com


[prev in list] [next in list] [prev in thread] [next in thread]