[prev in list] [next in list] [prev in thread] [next in thread] 

List:       paraview
Subject:    Re: [Paraview] ParaView 1.4.3 in render-server mode
From:       "William A. Hoffman" <billlist () nycap ! rr ! com>
Date:       2004-09-03 2:59:51
Message-ID: 6.1.0.6.2.20040902225212.051febb0 () pop ! nycap ! rr ! com
[Download RAW message or body]

Actually, you can specify the port used by the render server,
the option is as follows:
--render-node-port=11111

The option should be given to the render-server.
However, it is usually better to let the OS assign the port as
it will pick a port that is not in use.

-Bill

At 05:38 PM 9/2/2004, Joseph Insley wrote:

>>As far as I know, there is no way of specifying which ports to use on
>>the render server nodes. ParaView will ask libc to come up with
>>available ports and use them. As long as you set the machines file
>>properly, this shouldn't be a problem (unless you have a firewall that
>>blocks those ports)
>>
>>-Berk
>>
>>


[prev in list] [next in list] [prev in thread] [next in thread]