[prev in list] [next in list] [prev in thread] [next in thread] 

List:       osiris
Subject:    Re: [osiris] edit-config doesn't work
From:       Brian Wotring <brian () shmoo ! com>
Date:       2003-11-16 14:22:49
Message-ID: 5B7F2268-1840-11D8-8D28-000393578C14 () shmoo ! com
[Download RAW message or body]


"local" is the name of your host.  You used the default config, so the 
name of your config is "default".   To edit the default config for this 
host, first, select the host:

     host local

Then, edit the config named 'default':

     edit-config default


On Nov 16, 2003, at 12:19 AM, Amihai Silverman wrote:

> Hi,
> I followed your instructions deleted local and initiated it with 
> new-host,
> but then doing "edit-config local" it gives: "error: no host 
> specified."
> Please see the list below, I will be grateful for your help
> Amihai.
>
>
> osiris-2.1.0: new-host
>
> [ new host ]
>
>> name this host []:  local
>> hostname/IP address []: 127.0.0.1
>> description []: local
>> host type (generic/router) [generic]:
>> enable scan logging for this host? (yes/no) [no]: yes
>> archive scan databases for this host?  (yes/no) [no]:
>> enable admin email notification for this host? (yes/no) [yes]:
>> send scan notification, even when no changes detected  (yes/no) [no]:
> yes
>> notification email (default uses mhost address) []: amihai
>> configure scan scheduling information? (yes/no) [no]:
>> activate this host? (yes/no) [no]: y
>
> host                  => local
> hostname/IP address   => 127.0.0.1
> description           => local
> host type             => generic
> log enabled           => yes
> archive scans         => no
> notifications enabled => yes
> notifications always  => yes
> notify email          => amihai
> scans starting on     => (not configured)
> scan frequency        => (not configured)
> enabled               => yes
>
> Is this correct (y/n)? y
> the new host (local) was sucessfully created.
> initialize this host? (yes/no): y
>
> Initializing a host will push over a config, start
> a scan, and set the created database to be the
> trusted database.
>
> Are you sure you want to initialize this host (yes/no): y
>
> OS Name: Linux
> OS Version: 2.4.18
>
> use the default config for this OS? (yes/no): y
> default config for (Linux) imported.
> perform an initial scan and database for this host? (yes/no): no
> osiris-2.1.0: status local
>
> [ current status of host: local ]
>
>      current time: Sun Nov 16 08:59:03 2003
>          up since: Wed Nov 12 11:53:22 2003
>
>  last config push: Sun Nov 16 08:58:52 2003
>  configuration id: eb0be25b
>
>     daemon status: idle.
>     config status: current config is valid.
>    osiris version: 2.1.0
>                OS: Linux 2.4.18
>
> osiris-2.1.0: edit-config local
> error: no host specified.
>
> _______________________________________________
> osiris mailing list
> osiris@lists.shmoo.com
> https://lists.shmoo.com/mailman/listinfo/osiris
>
>
--
     Brian Wotring ( brian@shmoo.com )
     PGP KeyID: 0x9674763D


[prev in list] [next in list] [prev in thread] [next in thread]