[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openvswitch-discuss
Subject:    [ovs-discuss] Multicast over GRE Tunnels
From:       ahp.caringo () gmail ! com (Aaron Pierce)
Date:       2015-06-29 22:26:12
Message-ID: CAAcraLo2T_Q-Np+fVg3cbgQH2UXeX_p47k=8r0+iz8MXDx2v6Q () mail ! gmail ! com
[Download RAW message or body]

Thank you for the clarification.

I was able to get multicast traffic over the tunnel after adding a routing
rule for the multicast IP address.  Once I figured that out, I was able to
finish my proof-of-concept successfully.

I look forward to using Open vSwitch in my project.

- Aaron

On Mon, Jun 29, 2015 at 4:09 PM, Jesse Gross <jesse at nicira.com> wrote:

> On Fri, Jun 26, 2015 at 12:36 PM, Aaron Pierce <ahp.caringo at gmail.com>
> wrote:
> > I would like to use OVS/GRE to tunnel multicast between nodes.  I've set
> up
> > a test environment, and am unable to get multicast working between GRE
> > connected nodes(UDP and TCP work fine).
> >
> > I also found a 5 year old thread suggesting that multicast over GRE isn't
> > implemented:
> >
> > http://openvswitch.org/pipermail/discuss/2010-September/004454.html
> >
> >> This configuration would normally work.  However, multicast isn't
> >> currently implemented in the Open vSwitch GRE stack.  It's planned and
> >> it shouldn't be too much work but it hasn't been done yet.
> >
> >
> > Should multicast over a GRE tunnel work?
>
> Nothing was ever implemented on this front, so it hasn't changed. It
> should be possible to run multicast traffic over a unicast tunnel
> (since the tunnel itself doesn't care about IP layer) but there's no
> support for the tunnels themselves being multicast.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openvswitch.org/pipermail/discuss/attachments/20150629/0e6ace31/attachment-0001.html>

[prev in list] [next in list] [prev in thread] [next in thread]