[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openvswitch-discuss
Subject:    [ovs-discuss] Queue-Stats command not working
From:       haleema.s.mahmood () gmail ! com (Haleema Sadia Mahmood)
Date:       2015-04-30 6:52:45
Message-ID: D96B032E-A664-4D8D-A876-03C94E517290 () gmail ! com
[Download RAW message or body]

Hey everyone,

So I am trying to configure queues on a mininet topology. The command that I use is, \
(here s1-eth1 is my port 1) 

sudo ovs-vsctl set port s1-eth1 qos=@newqos - -  - -id=@newqos create qos \
type=linux-htb queues=0=@q0  - -  - -id=@q0 create queue \
other-config:max-rate=100000000 other-config:min-rate=5000000 - -

The qos is attached to the port, checked it from sudo ovs-vsctl list port s1-eth1, \
and the queues are created.

But when I try to use the command 
sudo ovs-ofctl queue-stats s1 s1-eth1 -O OpenFlow13

it returns : OFPST_QUEUE reply (OF1.3) (xid=0x4): 0 queues

And when I try
sudo ovs-ofctl queue-stats s1 -O OpenFlow13

it returns: OFPST_QUEUE reply (OF1.3) (xid=0x2): 0 queues

I am using OVS 2.3.90, and the version of OpenFlow version is 1.3.

Also when I try to check the queues with iperf sending udp packets on the queue \
created, the rate is not limited on the queue.

Any ideas what am I missing while setting this queue?

Thanks!

Best,
Haleema
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openvswitch.org/pipermail/discuss/attachments/20150430/92a53664/attachment.html>



[prev in list] [next in list] [prev in thread] [next in thread]