[prev in list] [next in list] [prev in thread] [next in thread]
List: openvas-discuss
Subject: Re: [Openvas-discuss] Ports Range on Targets
From: Thibaut PIRONNEAU <thibaut.pironneau () univ-bpclermont ! fr>
Date: 2011-04-21 10:35:01
Message-ID: 4DB00855.6030506 () univ-bpclermont ! fr
[Download RAW message or body]
Le 21/04/2011 13:26, Matthew Mundell a écrit :
>> I use the OpenVas 4 system.
>> I can create targets with "port range", for example, with only http port
>> (tcp 80). But when I run a scan with a default configuration, all tcp
>> ports were scan... That is normal ?
>
> It should only scan port 80. How do you know it scanned all ports?
I know that with Wireshark running on the scanned host...
>
> --
> Greenbone Networks GmbH
> Neuer Graben 17, 49074 Osnabrueck, Germany | AG Osnabrueck, HR B 202460
> Executive Directors: Lukas Grunwald, Dr. Jan-Oliver Wagner
>
--
Thibaut PIRONNEAU
04.73.40.53.43
thibaut.pironneau@univ-bpclermont.fr
Centre Régional de Ressources Informatiques
Campus des Cézeaux
24, avenue des Landais
BP 80026
63177 Aubière
_______________________________________________
Openvas-discuss mailing list
Openvas-discuss@wald.intevation.org
http://lists.wald.intevation.org/mailman/listinfo/openvas-discuss
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic